Cospo Other models
1 model in this series
Cospo Cospo - class O2 trailer with a gross weight of 3,500 kg, an unladen weight of 3,120 kg, a payload of 380 kg, a length of 6,530 mm and a width of 2,350 mm, built 2013
With a gross weight of 3,500 kg, the Cospo Cospo falls into class O2, at the upper end of the range between 750 kg and 3.5 tonnes. The vehicle dates from 2013.
Read on 3 more paragraphs
At a length of 6,530 mm, a width of 2,350 mm and a wheelbase of 4,180 mm, the Cospo has an unladen weight of 3,120 kg; against the gross weight of 3,500 kg that leaves a payload of 380 kg. It runs on 4 wheels. The narrow margin between unladen and gross weight points to an already heavily built trailer that leaves little reserve for extra load.
In class O2, the overrun brake is the usual type, and a category B licence is normally sufficient for towing, provided the combined weight stays within the applicable limits. With a payload of only 380 kg, weighing the load carefully is advisable so the gross weight is not exceeded. A wheelbase of 4,180 mm on a length of 6,530 mm fits a compact two-axle layout typical of this weight class.
When buying used, check the condition of the overrun device and its damper, corrosion on the frame and axle mounts, and the state of tyres and rims. The function of the lighting and electrical connector should also be checked, as well as the coupling head itself for wear. With such a low payload, any additional equipment further reduces the available load reserve. Exactly one example of this type is registered in the Netherlands, so spare parts are only available to a limited extent.
Sources: SpecCodex-Register: Kennwerte des Modells Cospo Cospo
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
