Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Condor › Other models

Condor Other models

6 models in this series

Condor – other models: the collective page of trailers outside the named ranges, from the 200 E to the Seresta, 539 to 5,030 kg unladen weight, 850 to 20,000 kg gross weight

This page gathers the trailers the register lists under the Condor brand without assigning them to a named range. The types 200 E, 350, 370, 420, 460 T and Seresta mostly carry three-digit numbers as their designation, though their exact meaning cannot be reliably established. The figures are drawn from vehicle registration data, in which each model is listed individually with its technical values.

Read on 3 more paragraphs

The register lists here 6 versions with unladen weights from 539 to 5,030 kg, gross weights from 850 to 20,000 kg, a length of 8,960 mm and widths from 2,060 to 2,500 mm.

The spread of gross weights from 850 kg to 20 tonnes runs from a small, unbraked or lightly braked trailer behind a car to a medium-weight tandem-axle trailer behind a lorry or tractor unit. Widths of 2.06 to 2.5 metres show correspondingly different bodies, from narrow to the full width of a commercial vehicle.

On a used example, axle and wheel-bearing condition, the function of the brake system – on the lighter versions the overrun brake and its linkage, on the heavier ones the brake system with its lines –, rust on frame and drawbar, and the state of lighting, tyres and rims all count. Parts for such a small brand mostly run through independent trailer workshops rather than a manufacturer network. With such a diverse model programme, it is also worth comparing the data plate against the registration papers before buying.

Sources: SpecCodex register, model data: Condor (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare