Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Cela › Other models

Cela Other models

2 models in this series

Cela – other models: the collective page of trailers outside the named ranges, DT-25 and DT25, 3,150 kg unladen weight, 3,490 kg gross weight, 6,210 mm length

This page gathers the Cela trailers the register could not assign to a named range – with only two listed types, it amounts to the whole recorded programme of the brand. DT-25 and DT25 differ only by the hyphen in how they are written; the digit sequence 25 itself is not interpreted here.

Read on 3 more paragraphs

The register lists here 2 versions with an unladen weight of 3,150 kg, a gross weight of 3,490 kg, a length of 6,210 mm and a width of 1,850 mm.

With a gross weight just under the 3.5-tonne limit, the type sits at the top end of the braked trailer class, used with a suitable tow vehicle for heavy loads. The narrow gap of only around 340 kilograms between unladen and gross weight shows that the trailer itself already accounts for most of the permitted load, pointing to a massive build tailored to a specific heavy cargo.

On a used example of this build, the condition of axles and brakes under full load matters most, along with the function of the overrun brake and its linkage, rust on frame and drawbar, and the condition and load rating of the tyres. Since the payload on this type is comparatively tight, it is also worth checking for signs of past overloading such as warped frame parts or worn-out springs. Parts for a brand with such a small range usually come through independent trailer workshops.

Sources: SpecCodex register, model data: Cela (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare