Ancy Other models
1 model in this series
Ancy SR1BDC – class O3 trailer with 6,950 kg gross weight, 1,600 kg unladen weight and a 5,350 kg payload, registered in the Netherlands
With a gross weight of 6,950 kg, the SR1BDC belongs to trailer class O3, the bracket between 3.5 and 10 tonnes. The trailer is registered in the Netherlands.
Read on 3 more paragraphs
The SR1BDC has an unladen weight of 1,600 kg against a gross weight of 6,950 kg, giving a payload of 5,350 kg — more than three times the unladen weight. Body length is 7,830 mm at a width of 2,400 mm, the wheelbase is 4,200 mm, and the permitted top speed is 100 km/h.
Class O3 trailers are built, depending on version, with either an overrun brake or already with an air brake system. Above 3.5 tonnes of towed weight, an ordinary category B car licence is usually no longer sufficient; category BE is typically required. With such a high ratio of payload to unladen weight, securing the load properly is essential so that the centre of gravity does not shift unfavourably when fully loaded.
When buying used, the condition of the axle, wheel bearings and brake system matters, whether an overrun or an air brake is fitted. The chassis and drawbar should be checked for corrosion and deformation from earlier overloading, as should the lighting, electrical connector and tyres. On such a light body with high payload, it is also worth checking the mounting of the lashing points on the load bed, which take heavy strain under varying heavy loads.
Sources: SpecCodex-Register: Kennwerte des Modells Ancy SR1BDC
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
