Agria Hispania Other models
2 models in this series
Agria 885 Thinker – compact four-wheel-drive tractor with a Deutz engine, built in Italy: 42.8 kW/57.4 hp from a water-cooled engine with mechanical front-wheel drive
The Agria 885 Thinker is a compact four-wheel-drive tractor of the light to medium class. It is powered by a bought-in engine from the manufacturer Deutz, and the machine itself was built in Italy; such compact four-wheel-drive tractors with an outsourced engine are common among smaller farm machinery brands that do not run their own engine production. Such machines were often sold under the name of a well-known brand even though the engine and part of the production came from other companies, allowing a complete tractor range to be offered with limited in-house development.
Read on 3 more paragraphs
The engine produces 42.8 kW or 57.4 hp, is water-cooled, and drive is transmitted through mechanical front-wheel drive (MFWD) to all four wheels.
Four-wheel drive in this design opens up grassland and light slopes where rear-wheel drive alone loses traction; a Deutz engine is one of the bought-in engines common in agricultural machinery that can be serviced and replaced independently of the tractor maker. Such combinations of a bought-in engine with in-house vehicle integration were not the exception but rather the rule for smaller suppliers in the European compact-tractor market of the second half of the 20th century.
With this engine, the usual Deutz checkpoints apply, such as the injection pump, cooling system and condition of the cylinder head gasket; on a four-wheel-drive tractor of this size, it is also worth checking the front axle hubs, transfer case and drive shafts for play and tightness. On a tractor with this combination of an outsourced engine and an in-house chassis, the wiring and the hydraulic connections between engine and chassis are also worth checking separately.
Sources: SpecCodex-Register: Kennwerte des Modells Agria 885 Thinker, Agria (manufacturer)
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
