Zvvz Machinery NCD 45
Built: 2016 · Series: Other models
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zvvz Machinery – other models: the collective page of trailers outside the named ranges, NCD 45 and NCEA 35, 4,875 to 5,200 kg unladen weight, 39,500 kg gross weight
This page gathers the two trailers of the Czech brand Zvvz Machinery from Milevsko, which the register could not assign to a named range and which together make up the entire catalogue held here for the brand. The type designations NCD 45 and NCEA 35 follow different letter codes with an attached number. The programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 4,875 to 5,200 kg, a gross weight of 39,500 kg, lengths from 10,200 to 11,130 mm and a width of 2,550 mm.
With a gross weight of 39.5 tonnes against a comparatively low unladen weight, both versions fall into the class of heavy trailers for transporting machinery and plant components, towed behind suitably rated tractor units in industrial heavy transport. The large payload margin above the unladen weight is characteristic of this vehicle class.
On a used example in this weight class, the condition and load rating of the axles, the function of the brake system and couplings to the tractor unit, rust on frame and side members, and the condition of ramps and hydraulics, where fitted, all count above all. Lighting, plug connections and tyres are also worth checking, along with documentation of any special heavy-transport permits. Parts for such small brands usually run through independent commercial-vehicle workshops.
Sources: SpecCodex register, model data: Zvvz Machinery (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,130 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,540 mmcorrect |
| Unladen weight | 5,200 kgcorrect |
| Gross vehicle weight | 39,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Zvvz Machinery NCD 45 weigh?
The unladen weight is 5,200 kg.
What is the gross vehicle weight of the Zvvz Machinery NCD 45?
39,500 kg.
Up to what speed is the Zvvz Machinery NCD 45 approved?
Approved up to 100 km/h.
What are the dimensions of the Zvvz Machinery NCD 45?
11,130 mm × 2,550 mm.
When was the Zvvz Machinery NCD 45 built?
Production years: 2016.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
