Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Zoda › Other models › MEPS225M-4

Zoda MEPS225M-4

Series: Other models

Source: xueqiu.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Zoda lists the MEPS225M-4 as a three-phase induction motor. The rated output is 45 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 415 V. The housing is frame size 225 M in foot-mounted form. The protection class is IP55. The efficiency is 93.5 per cent at full load, 93.9 per cent at 75 per cent load and 93.6 per cent at half load. The motor weighs 317 kg. At full load it delivers 348 Nm. The mounting arrangement to IEC 60034-7 is B3. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEEE 112-B(USA). Rated output across the Zoda range ranges from 7.5 to 132 kW; the MEPS225M-4 sits in the lower part of that range with 45 kW. Its immediate neighbours are the YE2(IP23)-180L3-2 below it with 37 kW and the MEPS-250M-2 above it with 55 kW. 23 Zoda models are on record.

Zoda – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, YE2 standard range and MEPS scheme, frame sizes 132 to 280, 7.5 to 132 kW, 2- to 4-pole

This page gathers the Zoda three-phase motors the Australian energy-efficiency register (MEPS) could not assign to a named range. Zoda is a Chinese maker of three-phase motors for the Australian and South-East Asian markets. The designations in the register follow two schemes: a "MEPS" prefix with frame size and pole count, such as MEPS-160L-4, and the YE2 range, a standard series widespread in China for three-phase motors with raised efficiency, in part in the open IP23 version YE2(IP23). One model, VSD280, is recognisably intended for operation on a variable-speed drive.

Read on 3 more paragraphs

The register lists here 23 versions with 7.5 to 132 kW, two- to four-pole, full-load efficiencies from 89.43 to 95.04% and at 75% load from 89.23 to 94.48%. Frame sizes run from 132 to 280, supply voltage from 400 to 415 V, protection is mostly IP55. Manufacturing is exclusively in China, testing followed the 2019 GEMS determination with test methods A, 2-1-1B and B; none of the 15 classified motors reaches a High Efficiency Level.

Zoda positions itself among the numerous Chinese suppliers of IEC standard motors that gain access to the Australian industrial-drive market through MEPS registration; the range covers mid-range power classes for pumps, fans and conveyors, with the VSD280 also a version for variable-speed applications.

When buying used, bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and protection rating matter; on the VSD280 version, inverter suitability is also worth checking. Spares run through the distribution for Chinese standard motors.

Sources: SpecCodex register, model data: Zoda (weitere Modelle, MEPS-Registrierungen)

Technical data

Engine

Rated output45 kWcorrect

Dimensions and weights

Weight317 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size225 M (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load93.51 %correct
Efficiency at 75 % load93.93 %correct
Efficiency at half load93.57 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEEE 112-B(USA)correct

Frequently asked questions

How much power does the Zoda MEPS225M-4 have?

The Zoda MEPS225M-4 delivers 45 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare