Technical register for agricultural, construction and commercial machinery · sourced data

Zisulzisuralzis ZiS-5

Built: 1933-1958 · Series: Other models

Wikimedia Commons · Public domain · Jeka3000 · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Zisulzisuralzis ZiS-5 is a machine built by Zisulzisuralzis. Production: 1933-1958. The machine is 6,060 mm long, 2,235 mm wide and 2,160 mm high. The unladen weight is 3,075 kg. The wheelbase measures 3,810 mm. Transmission: 4-biegowa, manual gearboxna. Drive: tylny. Unladen weight within this group ranges from 2 to 65,800 kg; the ZiS-5 sits at the bottom of that range with 3,075 kg. Its immediate neighbours are the Steyr 1500A below it with 2,500 kg and the Kia KM450 above it with 3,100 kg.

ZiS-5 (ZiS-5M): rear-wheel-drive truck with six-cylinder carburettor engine, 5,555 cc displacement, 73 hp output, manual four-speed gearbox and 3,810 mm wheelbase, built from 1933 to 1958

The ZiS-5 was built over decades at several different locations across the Soviet Union, reflected in the compound manufacturer designation ZIS, UlZIS and UralZIS: over its long production run, manufacturing moved from one plant to the next while the basic design remained unchanged.

Read on 3 more paragraphs

The ZiS-5 in its ZiS-5M version is powered by a six-cylinder carburettor engine with 5,555 cc of displacement, delivering 73 hp. Power is routed through a manual four-speed gearbox to the rear axle, making the drivetrain rear-wheel drive. With a wheelbase of 3,810 mm, the truck is 6,060 mm long, 2,235 mm wide, 2,160 mm tall and weighs 3,075 kg.

A rear-wheel-drive truck of this design and era is characterised by its long 3,810 mm wheelbase, which creates space on the load bed for bulky goods, together with a sturdy six-cylinder carburettor engine designed for simple maintenance with little specialised tooling.

When buying a used ZiS-5, check the carburettor engine for compression and for leaks in the fuel system, since engines like this are often gummed up after decades of standing. On the four-speed gearbox, check shift behaviour across all gears, and on the long-wheelbase chassis additionally inspect the frame for distortion and cracking, as well as the rear-axle leaf springs for fatigue, since these come under particular strain over the service life of a truck with a curb weight of 3,075 kg.

Sources: SpecCodex-Register: Kennwerte des Modells ZiS-5

Technical data

Engine

EngineZiS-5 (ZiS-5M), 5555 cm³, 73 KMcorrect

Dimensions and weights

Length6,060 mmcorrect
Width2,235 mmcorrect
Height2,160 mmcorrect
Wheelbase3,810 mmcorrect
Unladen weight3,075 kgcorrect

Drivetrain and chassis

Drivetylnycorrect
Gearbox4-speed, manual gearboxcorrect

Frequently asked questions

How much does the Zisulzisuralzis ZiS-5 weigh?

The unladen weight is 3,075 kg.

What are the dimensions of the Zisulzisuralzis ZiS-5?

6,060 mm × 2,235 mm × 2,160 mm.

When was the Zisulzisuralzis ZiS-5 built?

Production years: 1933-1958.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare