Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Zetor › Proxima 85

Zetor Proxima 85

Built: 2011-2011 · Series: PROXIMA

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Zetor Proxima 85 is a model in the PROXIMA series. Production: 2011. The engine delivers 64.3 kW, has 4 cylinders, with a displacement of 4,156 cm³. The machine is 4,710 mm long and 2,319 mm wide. The unladen weight is 4,625 kg. The gross vehicle weight is 5,500 kg. The PROXIMA series covers 60 models. Rated output within it ranges from 44.9 to 86.2 kW; the Proxima 85 sits in the middle of that range with 64.3 kW. Its immediate neighbours are the Proxima 90 (A) below it with 60.3 kW and the PROXIMA 95 above it with 66 kW. Unladen weight within it ranges from 3,130 to 5,000 kg; here the Proxima 85 sits in the upper part of that range with 4,625 kg. 371 Zetor models across 27 series are on record.

Zetor Proxima: the Czech entry-level line of the 2000s, from the PROXIMA 65 to the PROXIMA 95, 44.9 to 86.2 kW, four-cylinder engines throughout with water cooling

The Proxima is Zetor's straightforward mid-range series, built in Brno. It launched in 2004 as part of the new Unified Row I (UR I) generation, which replaced older Zetor lines with engines meeting tighter emissions limits, and stayed in the catalogue well into the 2010s.

Read on 4 more paragraphs

The register lists 41 live models in this series, from the PROXIMA 65 up to the PROXIMA 95, plus the four-wheel-drive variants PROXIMA 6441, 7441 and 8441 with their 4x4 designations. Output ranges from 44.9 to 86.2 kW, weight from 3,130 to 5,000 kg. All models share a four-cylinder engine of roughly 4,150 cm3.

Zetor positioned the Proxima deliberately below the more powerful Forterra as a budget-conscious all-rounder for smaller and mid-sized farms: mechanical transmission, a simple cab, limited electronics. That made it one of Zetor's best-selling lines across Central and Eastern Europe.

Buyers looking at a used Proxima should check whether four-wheel drive was fitted as standard, since it was not on every early model, and inspect the clutch and gearbox for wear after high operating hours.

The 12 to 24 gears recorded in the register point to the creeper gear groups available on the Proxima for very slow work with implements such as potato planters or mulchers, alongside the normal field and road gearing. In this power class of 44.9 to 86.2 kW, the ISO 730 three-point linkage is mostly built to Category I or II, with the PTO running at the standard 540 rpm speed.

Sources: SpecCodex register, model data: Zetor Proxima, Zetor

Technical data

Engine

Power64.3 kWcorrect
Cylinders4correct
Displacement4,156 cm³correct

Dimensions and weights

Length4,710 mmcorrect
Width2,319 mmcorrect
Unladen weight4,625 kgcorrect
Gross vehicle weight5,500 kgcorrect

Where this model stands

Power-to-weight ratio: 13.9 kW/t (64 kW / 4.6 t)

Power class: Universal (40–100 hp)

Stronger than 60% of the tractors in the register — out of 15,661 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Zetor Proxima 85 have?

The Zetor Proxima 85 delivers 64.3 kW.

How much does the Zetor Proxima 85 weigh?

The unladen weight is 4,625 kg.

What is the gross vehicle weight of the Zetor Proxima 85?

5,500 kg.

What engine does the Zetor Proxima 85 have?

4 cylinders, 4,156 cm³ displacement.

What are the dimensions of the Zetor Proxima 85?

4,710 mm × 2,319 mm.

When was the Zetor Proxima 85 built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare