Zeck WB1700
Built: 2017-2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zeck – other models: the collective page of winch and cable-pull trailers outside the named ranges from Scheßlitz, types such as ST 140 and EV ST 140, 950 kg to 15.9 t unladen weight, up to 16 t gross weight
This page gathers the Zeck trailers the register could not assign to a named range. Zeck of Scheßlitz builds cable winches and cable-pulling units mounted on trailer chassis so they can lay cables and lines on site or pull heavy loads. The designation EV ST 140 Elektro marks an electrically driven version of the ST 140 type, while TBF 70 SB and the WB range (WB 1500/5, WB 1700, WB 1800/4.5) form further equipment classes in the line-up. The abbreviations SPW and TBF mark further equipment classes alongside the main ST and WB series.
Read on 3 more paragraphs
The register lists here 15 versions with unladen weights from 950 to 15,870 kg, gross weights from 1,300 to 16,000 kg, lengths from 3,060 to 7,320 mm and widths from 1,590 to 2,550 mm.
The span from under a tonne to nearly 16 tonnes gross weight shows that the Zeck name covers both small, mobile cable-pulling trailers and heavily built winch trailers for grid and pipeline construction. The smaller, electrically driven models are suited to use in city centres and on building sites with limited space, where noise and emissions must be kept low.
On a used purchase, what matters on these trailers is the condition of the rope or cable drum, the hydraulics and electrics of the winch, chassis and axles, brakes, and the drawbar and connector cables; spare parts run through Zeck.
Technical data
Dimensions and weights
| Length | 7,320 mmcorrect |
|---|---|
| Width | 2,540 mmcorrect |
| Wheelbase | 4,900 mmcorrect |
| Unladen weight | 15,870 kgcorrect |
| Gross vehicle weight | 16,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Zeck WB1700 weigh?
The unladen weight is 15,870 kg.
What is the gross vehicle weight of the Zeck WB1700?
16,000 kg.
Up to what speed is the Zeck WB1700 approved?
Approved up to 100 km/h.
What are the dimensions of the Zeck WB1700?
7,320 mm × 2,540 mm.
When was the Zeck WB1700 built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
EV ST 140 ELEKTRO
SPW 7,5
ST 140
ST 500 D
ST140
ST140 SPS
TBF 70 SB
TBF 70SB
WB 1800/4,5
WB1500/5
Z280
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.