StartTractorsZanello › 900 C

Zanello 900 C

Built: 1995-1995 · Series: Other models

The photo shows the 700 C from the same series. Source: https://www.tractordata.com/farm-tractors/005/2/4/5248-zanel

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Built in 1995, the Zanello 900 C is a tractor from Zanello. The six-cylinder engine produces 300 kW. Rated speed is 2,100 rpm.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 45 to 300 kW; with 300 kW, the 900 C sits at the top. Below it ranks the (CMZ) MX 250 with 240 kW.

Technical data

Engine

Engine makeCumminscorrect
Engine modelNT855A400correct
Fueldieselcorrect
Power400 hp (300 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement14,000correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Forward gears12correct
Reverse gears4correct

Origin and approval

PlantLas Varillas, Córdoba, Argentinacorrect

Frequently asked questions

How much power does the Zanello 900 C have?

The Zanello 900 C delivers 400 hp.

What engine does the Zanello 900 C have?

6 cylinders, Diesel.

When was the Zanello 900 C built?

Production years: 1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare