YTO ZL50D-II
Series: YTO Wheel Loader
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The YTO ZL50D-II is a wheel loader from the YTO Wheel Loader series. 162 kW is available.
At 36 km/h, that is as fast as it goes. In service, it weighs 17,000 kg.
Within the range, rated power spans from 92 to 162 kW; with 162 kW, the ZL50D-II sits at the top. Below it ranks the ZL50C-II with 155 kW.
Technical data
Engine
| Engine model | WD615 67G3-28correct |
|---|---|
| Power | 162 kWcorrect |
Dimensions and weights
| Unladen weight | 17,000 kgcorrect |
|---|
Drivetrain and chassis
| Top speed | 36 km/hcorrect |
|---|
Other data
| Senkzeit s | 11 scorrect |
|---|
Where this model stands
Power-to-weight ratio: 9.5 kW/t (162 kW / 17 t)
Stronger than 77% of the wheel loaders in the register — out of 1,253 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the YTO ZL50D-II have?
The YTO ZL50D-II delivers 162 kW.
How much does the YTO ZL50D-II weigh?
The unladen weight is 17,000 kg.
How fast does the YTO ZL50D-II go?
Top speed is 36 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Wheel loader in 3D section
Turn the model, look inside and click an assembly — each one is explained.