Yanmar EF235H 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Yanmar EF235H is a tractor from the Yanmar 4WD Tractor series. Power comes from a three-cylinder engine; from 1.6 litres it draws 35 hp (26 kW). With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.
At 30 km/h, that is as fast as it goes. Empty, it weighs 1,105 kg.
Within the range, rated power spans from 14.1 to 59.7 hp; with 35.4 hp, the EF235H sits in the upper third. Directly alongside are the YT2 with 34.7 hp below and the EF453T with 45 hp above.
Technical data
Engine
| Engine model | 3TNV88correct |
|---|---|
| Power | 35.4 hp (26 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,643.6 cm³correct |
Dimensions and weights
| Ground clearance | 155.2correct |
|---|---|
| Unladen weight | 1,105 kgcorrect |
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|---|
| Tyre size | 24x8.50-12, 315/80D-16correct |
| Top speed | 30.1 km/hcorrect |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 23.1 l/mincorrect |
|---|---|
| Fuel tank capacity | 28 lcorrect |
Other data
| Height | 2,002.5correct |
|---|
Where this model stands
Power-to-weight ratio: 23.5 kW/t (26 kW / 1.1 t)
Power class: Compact (< 40 hp)
Stronger than 22% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Yanmar EF235H have?
The Yanmar EF235H delivers 35.4 hp.
How much does the Yanmar EF235H weigh?
The unladen weight is 1,105 kg.
What engine does the Yanmar EF235H have?
3 cylinders, 1,644 cm³ displacement.
How fast does the Yanmar EF235H go?
Top speed is 30.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.