Yanmar EF227H 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Yanmar EF227H belongs to the Yanmar 4WD Tractor series. 27 hp (19.8 kW) is what the three-cylinder engine gets out of 1.3 litres. With a rated speed of 2,500 rpm, it is built for pulling power, not for revving.
At 29 km/h, that is as fast as it goes. Empty, it weighs 1,090 kg.
Within the range, rated power spans from 14.1 to 59.7 hp; with 26.9 hp, the EF227H sits in the lower third. Directly alongside are the Ke - 200H with 20.3 hp below and the EF230H with 32.2 hp above.
Technical data
Engine
| Engine model | 3TNV82Acorrect |
|---|---|
| Power | 26.9 hp (19.8 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,332.3 cm³correct |
Dimensions and weights
| Ground clearance | 155.2correct |
|---|---|
| Unladen weight | 1,090 kgcorrect |
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|---|
| Tyre size | 24x8.50-12, 315/80D-16correct |
| Top speed | 29.1 km/hcorrect |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 22.3 l/mincorrect |
|---|---|
| Fuel tank capacity | 28 lcorrect |
Other data
| Height | 2,002.5correct |
|---|
Where this model stands
Power-to-weight ratio: 18.2 kW/t (20 kW / 1.1 t)
Power class: Compact (< 40 hp)
Stronger than 15% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Yanmar EF227H have?
The Yanmar EF227H delivers 26.9 hp.
How much does the Yanmar EF227H weigh?
The unladen weight is 1,090 kg.
What engine does the Yanmar EF227H have?
3 cylinders, 1,332 cm³ displacement.
How fast does the Yanmar EF227H go?
Top speed is 29.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.