Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Wullhorst › Other models › TGS 18.360

Wullhorst TGS 18.360

Built: 2014 · Series: Other models

More machines from model year 2014

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TGS 18.360 comes from Wullhorst. Production: 2014. The engine has 6 cylinders, with a displacement of 10,518 cm³. The vehicle is 10,090 mm long and 2,600 mm wide. The unladen weight is 11,740 kg. The wheelbase measures 5,500 mm. Top speed is 90 km/h. The gross vehicle weight is 19,000 kg. The vehicle runs on 6 wheels. Unladen weight within this group ranges from 805 to 104,100 kg; the TGS 18.360 sits at the bottom of that range with 11,740 kg. Its immediate neighbours are the S 660 B8x4*4NA below it with 11,736 kg and the TGS 31.480 above it with 11,742 kg. Gross vehicle weight within this group ranges from 1,560 to 104,100 kg; here the TGS 18.360 sits in the lower part of that range with 19,000 kg.

Wullhorst TGS 18.360 (2014): three-axle chassis with a 10,518 cm³ six-cylinder engine, 19,000 kg gross vehicle weight, 5,500 mm wheelbase and a 90 km/h top speed

The TGS 18.360 type designation follows the naming pattern common on heavy trucks, in which the first number states the weight class in tonnes and the second the engine output in metric horsepower. The 2014 entry describes a chassis of this weight and power class, fitted with a six-cylinder engine.

Read on 3 more paragraphs

The engine displaces 10,518 cm³ across six cylinders. With a gross vehicle weight of 19,000 kg and a kerb weight of 11,740 kg, around 7,260 kg remains for payload and body. A length of 10,090 mm, a wheelbase of 5,500 mm and six wheels point to a typical three-axle layout, with a design top speed of 90 km/h.

At a gross weight of 19,000 kg, the vehicle belongs to EU class N3, the heavy trucks above 12 tonnes, for which the EU sets a top speed of 90 km/h – exactly the figure this vehicle is limited to by design. A wheelbase of 5,500 mm is a common figure for a three-axle chassis carrying a tipper, mixer or construction body, allowing short overhangs and good manoeuvrability on tight sites.

When buying a three-axle chassis of this weight class, the key points are the condition of the air or leaf suspension on the rear axle, wear in the steering and braking systems, and corrosion on the frame rails and axle mounts. With an engine displacing over 10 litres, it is also worth checking the turbocharger, injection pump and mileage since the last engine overhaul.

Sources: SpecCodex-Register: Kennwerte des Modells Wullhorst TGS 18.360

Technical data

Engine

Cylinders6correct
Displacement10,518 cm³correct

Dimensions and weights

Length10,090 mmcorrect
Width2,600 mmcorrect
Wheelbase5,500 mmcorrect
Unladen weight11,740 kgcorrect
Gross vehicle weight19,000 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the Wullhorst TGS 18.360 weigh?

The unladen weight is 11,740 kg.

What is the gross vehicle weight of the Wullhorst TGS 18.360?

19,000 kg.

What engine does the Wullhorst TGS 18.360 have?

6 cylinders, 10,518 cm³ displacement.

How fast does the Wullhorst TGS 18.360 go?

Top speed is 90 km/h.

What are the dimensions of the Wullhorst TGS 18.360?

10,090 mm × 2,600 mm.

When was the Wullhorst TGS 18.360 built?

Production years: 2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare