Wm Meyer HLC 35
Built: 2004 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Wm Meyer – further models: collector page of light and medium multi-purpose and tandem-axle trailers outside the main series, 181 to 7,290 kg kerb weight, up to 18 t gross vehicle weight
Wm Meyer builds multi-purpose and commercial trailers; this page gathers models outside the named series. A large share of the type designations begin with the AZ prefix, such as AZ 10, AZ 16, AZ 20 and AZ 25, sometimes with a fractional code such as AZ 2030/151; alongside these stand-alone types such as HLC 35, HLNC or HZB10.
Read on 3 more paragraphs
The register lists 115 versions with kerb weights from 181 to 7,290 kg and a gross vehicle weight from 1,000 to 18,000 kg. Widths range from 1.56 to 2.60 m; lengths span 3.46 to 10.30 m.
Trailers in this range cover a broad field of use, from small single-axle trailers to medium tandem-axle trailers for agriculture and trade. The lighter versions run on overrun brakes, while tandem-axle trailers from around 3.5 tonnes carry their own brake system and sometimes leaf springs suited to field use; they compete with numerous other European small- and medium-series manufacturers. Towing the heavier versions from 3.5 t upward requires more than a category B car licence; category BE becomes necessary, or C1E and CE at even greater combination weights.
When buying used, check the frame and load platform (corrosion at welds and wheel arches), axles, wheel bearings and brake linings, lighting, and the coupling and jockey wheel; on trailers used in farming, also check the side-panel hinges and latches for wear. Running-gear and coupling spares are available through the general trailer-parts trade.
Sources: SpecCodex register, model data: Wm Meyer (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 710 mmcorrect |
| Unladen weight | 830 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Wm Meyer HLC 35 weigh?
The unladen weight is 830 kg.
What is the gross vehicle weight of the Wm Meyer HLC 35?
3,500 kg.
Up to what speed is the Wm Meyer HLC 35 approved?
Approved up to 100 km/h.
When was the Wm Meyer HLC 35 built?
Production years: 2004.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.