Wilken A18-4-3
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Wilken – other models: the collective page of trailers outside the named ranges, the S 4-2 to S36-4-2 type series and the toilet trailer, unladen weight 260 to 14,890 kg, gross weight 1 to 36 tonnes
This page gathers the Wilken trailers the register could not assign to a named range. The S 4-2 to S36-4-2 type series gives, in the number after the S, a size class that consistently rises with the gross weight in tonnes, the following digits the axle and brake configuration; A18-4-3 denotes a further range of comparable design. Among the models is also a toilet trailer, a mobile sanitary unit on a trailer chassis.
Read on 3 more paragraphs
The register lists here 11 versions with unladen weights from 260 to 14,890 kg, gross weights from 1,000 to 36,000 kg, lengths from 9,100 to 13,950 mm and widths from 1,900 to 2,550 mm.
The span runs from light trailers in the class up to 3.5 tonnes to heavy semi-trailers over 10 tonnes; the S range with gross weights from about 24 tonnes is used above all in construction and heavy haulage, while the toilet trailer belongs to the events and construction-site sector. Widths from 1.9 to 2.55 m span both narrower construction trailers and semi-trailers at the full European standard width.
On used heavy S types, the condition of axles, brakes and chassis and the kingpin housing count; on the toilet trailer, the tightness of the tank and sanitary system and frost protection of the pipework; on all types, rust on the chassis and the condition of the lighting. Parts for axles and brakes on these trailers are usually available from general commercial-vehicle suppliers.
Sources: SpecCodex register, model data: Wilken (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,100 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,180 mmcorrect |
| Unladen weight | 3,890 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Wilken A18-4-3 weigh?
The unladen weight is 3,890 kg.
What is the gross vehicle weight of the Wilken A18-4-3?
18,000 kg.
Up to what speed is the Wilken A18-4-3 approved?
Approved up to 100 km/h.
What are the dimensions of the Wilken A18-4-3?
9,100 mm × 2,550 mm.
When was the Wilken A18-4-3 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
1 current listings for Wilken A18-4-3 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.