Case IH Farmall 45A
Built: 2010 · Series: Farmall
Photo from this series — not necessarily this version.Wikimedia Commons · CC BY-SA 4.0 · JoachimKohler-HB · Dateiseite
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Weitere Modelle series from Case IH includes the Farmall 45A. Production: 2010. The engine delivers 45 hp (34 kW), has 4 cylinders. The engine comes from ISM (Shibaura). Rated speed is 2,700 rpm. Transmission: synchromesh gearbox shuttle. The engine is water-cooled. The fuel is diesel. The gearbox offers 8 forward gears. There are also 1 reverse gears. The linkage is category I/II. The PTO runs at 540 rpm. The Weitere Modelle series covers 33 models. Rated output within it ranges from 26 to 600 hp; the Farmall 45A sits at the bottom of that range with 45 hp. Its immediate neighbours are the Farmall 40B below it with 41 hp and the JX1060C above it with 59 hp. 521 Case IH models across 60 series are on record. 24 verified figures are on file.
Technical data
Engine
| Engine make | ISM (Shibaura)correct |
|---|---|
| Fuel | dieselcorrect |
| Power | 45 hp (34 kW)correct |
| Rated speed | 2,700correct |
| Cylinders | 4correct |
| Displacement | 135 cu incorrect |
| Bore | 3,307correct |
| Stroke | 3,937correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 131.1 in (2WD); 133.5 in (MFWD)correct |
|---|---|
| Width | 66.1correct |
| Height | 93.9correct |
| Unladen weight | 3, 527 lbs (2WD); 3, 836 lbs (MFWD)correct |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | synchromesh gearbox shuttlecorrect |
| Forward gears | 8correct |
| Reverse gears | 1correct |
| Clutch | dry disccorrect |
Working data
| Lifting capacity | 1,830correct |
|---|---|
| PTO speed | 540correct |
| Linkage category | Cat I/IIcorrect |
Frequently asked questions
How much power does the Case IH Farmall 45A have?
The Case IH Farmall 45A delivers 45 hp.
What engine does the Case IH Farmall 45A have?
4 cylinders, diesel.
When was the Case IH Farmall 45A built?
Production years: 2010.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →