Case IH 5140
Built: 1990–1991 · Series: Other models
The photo shows the 3594 from the same series.
Source: https://agro-specs.com/tractors/4434-case-ih-3594.html
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The 5140 from Case IH is part of the Weitere Modelle series. Production: 1990–1991. The engine has 6 cylinders. The engine comes from CDC. Rated speed is 2,200 rpm. Transmission: fully synchromesh gearbox. The engine is water-cooled. The model was built in Neuss, Germany. The fuel is diesel. The gearbox offers 16 forward gears. There are also 12 reverse gears. The linkage is category II. The PTO runs at 540/1000 rpm. It was succeeded by the Case IH 5240. 521 Case IH models across 60 series are on record. 25 verified figures are on file.
Technical data
Engine
| Engine make | CDCcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 97 ; 110 hp (72 ; 82 kW)correct |
| Rated speed | 2,200correct |
| Cylinders | 6correct |
| Displacement | 359correct |
| Bore | 4.02correct |
| Stroke | 4.72correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Wheelbase | 103.7 in (2WD); 101.8 in (MFWD)correct |
|---|
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|---|
| Gearbox | fully synchromesh gearboxcorrect |
| Forward gears | 16correct |
| Reverse gears | 12correct |
| Clutch | hydraulic wet disccorrect |
Working data
| Lifting capacity | 7,700correct |
|---|---|
| PTO speed | 540/1000correct |
| Linkage category | Cat IIcorrect |
Origin and approval
| Plant | Neuss, Germanycorrect |
|---|---|
| Successor | Case IH 5240correct |
Other data
| Front linkage | Cat II (optional)correct |
|---|
Frequently asked questions
What engine does the Case IH 5140 have?
6 cylinders, diesel.
When was the Case IH 5140 built?
Production years: 1990–1991.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →