Volvo MP10 - 565 C
Built: 2012-2012 · Series: MP10 -
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Volvo MP10 – 16-litre six-cylinder road engine from Volvo Powertrain in Hagerstown, Maryland: EPA certification, 515 to 605 hp, model years 2012 to 2013
Volvo Powertrain, the drivetrain division of the Swedish Volvo group, builds its heavy commercial-vehicle engines at its North American plant in Hagerstown, Maryland. The MP10 is the North American name for the 16-litre inline-six that tops Volvo's heavy-truck engine programme above the smaller D11 and D13 ranges. This page gathers the MP10 versions listed under this EPA certification spelling.
Read on 3 more paragraphs
The register lists here five versions from MP10-515 M to MP10-605 C with 515 to 605 hp rated output at 1,500 to 1,900 rpm. Mixture formation runs through electronic direct injection with diesel as fuel, certified for model years 2012 and 2013. Maximum torque ranges from 1,909 to 2,096 Nm at 1,200 rpm.
The MP10 drives the heaviest tractor units and long-haul trucks in Volvo's North American programme, where sustained high output over long distances and heavy trailer loads is required; in this top power segment Volvo competes with the flagship engines from Cummins, Detroit Diesel and Paccar.
On a used purchase of this high-output long-haul engine, mileage and the service history of the injection system matter most, along with the condition of the turbocharger and charge-air cooling, the tightness of crankshaft seals and oil pan, and, on high-mileage vehicles, the condition of the clutch and drivetrain; spares and service run through the Volvo Trucks dealer network.
Sources: Kennwerte der Modelle Volvo MP10, Volvo Trucks (Hersteller)
Technical data
Engine
| Engine code | N / Acorrect |
|---|---|
| Engine family | CVPTH16.1S01; DVPTH16.1S01correct |
| Engine families | CVPTH16.1S01; DVPTH16.1S01correct |
| Fuel | dieselcorrect |
| Rated output | 565 bhpcorrect |
| Rated speed | 1,550 rpmcorrect |
| Maximum torque | 1,988 ft·lbfcorrect |
| Speed at max. torque | 1,200 rpmcorrect |
| Operating cycle | dieselcorrect |
| Injection | electronic direct injectioncorrect |
| Aspiration | single-stage turbocorrect |
Origin and approval
| Built from | 2012correct |
|---|---|
| Built to | 2013correct |
| Model year from | 2012correct |
| Model year to | 2013correct |
Other data
| Anwendungsbereich | HHDDcorrect |
|---|
Frequently asked questions
How much power does the Volvo MP10 - 565 C have?
The Volvo MP10 - 565 C delivers 565 kW.
When was the Volvo MP10 - 565 C built?
Production years: 2012.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Diesel engine in 3D section
Turn the model, look inside and click an assembly — each one is explained.