Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Volvo › BM › BM 2105

Volvo BM 2105

Series: BM

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Volvo BM 2105 is a tractor from the BM series. 122 kW is available.

Drive type: MFWD.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 22.8 to 122 kW; with 122 kW, the BM 2105 sits at the top. Below it ranks the BM 2600 with 87 kW.

Volvo BM – other models: the collective page of the Eskilstuna tractors outside the named ranges, from the two-cylinder BM 810 to 860 through BM Valmet 605 to 905 to the BM 2650H, 23 to 122 kW, Perkins and Volvo engines

This page gathers the Volvo BM tractors the register could not assign to a named range – from the two-cylinder classics of the BM 810 to 860 range to the larger BM Valmet models. Volvo BM traces back to Bolinder-Munktell in Eskilstuna, whose tractor production Volvo took over in the early 1950s; until 1985 the tractors carried the Volvo BM name, after which Valmet continued production. Designations with the BM prefix and a three-digit number (BM 810, BM 840, BM 860) denote the classic two-cylinder diesels, while models with the Valmet suffix (BM Valmet 605, 705, 805, 905) come from the joint production with the Finnish partner; the KRABAT range and the T models such as T600 and T700 also belong to this transitional period.

Read on 3 more paragraphs

The register lists here 27 versions with 22.8 to 122 kW (44.5 to 163 hp), a displacement of 2,240 cm³ in the two-cylinders, unladen weights from 1,650 to 1,860 kg, a length of 2,850 mm and widths from 1,610 to 1,700 mm; the engines are Perkins alongside Volvo's own units.

Volvo BM shaped Scandinavian farm technology for decades, particularly in Sweden and Finland, where the rugged two-cylinder diesels still work on small and medium farms today; the range also marks the transition from the Swedish Volvo BM brand to Finnish Valmet production, from which Valtra later emerged.

On used examples, engine condition and compression, the state of clutch and gearbox, rust on mudguards and bonnet, and the availability of parts, which run through specialist Scandinavian dealers and veteran clubs, all count; on the later BM Valmet models hydraulics and the PTO as well.

Sources: SpecCodex register, model data: Volvo BM

Technical data

Engine

Fueldieselcorrect
Power163 hp (122 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantSwedencorrect

Frequently asked questions

How much power does the Volvo BM 2105 have?

The Volvo BM 2105 delivers 163 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare