Volkswagen/juzjade CRAFTER
Built: 2018-2021 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Volkswagen Crafter: a long class N1 panel van with single rear wheels, 7,980 mm length, 161 km/h top speed and a 3,500 kg gross weight
The register entry lists Volkswagen/juzjade as the registration holder for this Crafter, registered between 2018 and 2021, while the model name unambiguously identifies Volkswagen as the manufacturer. Unlike the twin-wheel variant of the range, this vehicle runs on four wheels with single tyres on the rear axle despite a comparable length.
Read on 3 more paragraphs
The four-cylinder diesel engine displaces 1,968 cm³. At 7,980 mm long, on a 4,490 mm wheelbase and 2,400 mm wide, this is one of the range's longer panel van versions. Kerb weight of 2,315 kg leaves 1,185 kg of payload against the 3,500 kg gross weight, considerably more than the heavier twin-wheel chassis in the range. The design top speed is 161 km/h.
As a class N1 panel van, the Crafter can be driven on a category B licence as long as the gross weight stays under 3.5 t. Single rear wheels combined with considerable length point to a lighter box body rather than a heavy container build, as often seen in furniture or textile transport.
When buying a used Crafter this long with single rear wheels, the condition of the rear suspension matters, since it compresses more under full payload on a long overhang than shorter variants do. The dual-mass flywheel and injectors wear under high delivery mileage, and the sliding door guide rails should be checked for wear and smooth operation.
Sources: SpecCodex-Register: Kennwerte des Modells CRAFTER
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 7,980 mmcorrect |
|---|---|
| Width | 2,400 mmcorrect |
| Wheelbase | 4,490 mmcorrect |
| Unladen weight | 2,315 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 161 km/hcorrect |
Frequently asked questions
How much does the Volkswagen/juzjade CRAFTER weigh?
The unladen weight is 2,315 kg.
What is the gross vehicle weight of the Volkswagen/juzjade CRAFTER?
3,500 kg.
What engine does the Volkswagen/juzjade CRAFTER have?
4 cylinders, 1,968 cm³ displacement.
What are the dimensions of the Volkswagen/juzjade CRAFTER?
7,980 mm × 2,400 mm.
When was the Volkswagen/juzjade CRAFTER built?
Production years: 2018-2021.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
