Volkswagen/jegger CRAFTER
Built: 2018-2024 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Volkswagen Crafter: a long class N1 chassis with an 8,040 mm length, twin rear wheels, 161 km/h top speed and a 3,500 kg gross weight
The register entry lists Volkswagen/jegger as the registration holder for this Crafter, registered between 2018 and 2024, while the model name unambiguously identifies Volkswagen as the manufacturer. This long-wheelbase variant is among the range's largest versions and is usually fitted with a tall box body for long-haul work or used as a motorhome base.
Read on 3 more paragraphs
The four-cylinder diesel engine displaces 1,968 cm³. At 8,040 mm long, on a 4,500 mm wheelbase and with six wheels - meaning twin tyres on the rear axle - this is one of the largest chassis variants in the range, at 2,330 mm wide. Kerb weight of 2,970 kg leaves only 530 kg of payload against the 3,500 kg gross weight, and the design top speed is 161 km/h.
As a class N1 chassis, the Crafter can be driven on a category B licence as long as the gross weight stays under 3.5 t. Twin rear wheels improve tip-over stability under tall box bodies and are the usual technical solution for such a long wheelbase carrying a heavy build.
When buying a used chassis this long, it is worth checking the twin rear tyres for uneven wear, which can point to a bent axle. The dual-mass flywheel and injectors wear under high delivery mileage, and the rear leaf springs should be checked for sag and cracks before the vehicle is purchased, along with the fitting bolts of any tall box body.
Sources: SpecCodex-Register: Kennwerte des Modells CRAFTER
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 8,040 mmcorrect |
|---|---|
| Width | 2,330 mmcorrect |
| Wheelbase | 4,500 mmcorrect |
| Unladen weight | 2,970 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 161 km/hcorrect |
Frequently asked questions
How much does the Volkswagen/jegger CRAFTER weigh?
The unladen weight is 2,970 kg.
What is the gross vehicle weight of the Volkswagen/jegger CRAFTER?
3,500 kg.
What engine does the Volkswagen/jegger CRAFTER have?
4 cylinders, 1,968 cm³ displacement.
What are the dimensions of the Volkswagen/jegger CRAFTER?
8,040 mm × 2,330 mm.
When was the Volkswagen/jegger CRAFTER built?
Production years: 2018-2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
