Volkswagen/intrak CRAFTER
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Volkswagen Crafter: a class N1 panel van with a 1,968 cm³ diesel, 158 km/h top speed, a 3,640 mm wheelbase and a 3,500 kg gross weight
The register entry lists Volkswagen/intrak as the registration holder for this Crafter, registered in 2024, while the model name unambiguously identifies Volkswagen as the manufacturer. The Crafter forms the top size class in VW's commercial vehicle range and is built in numerous wheelbase, roof-height and body variants for different trade purposes.
Read on 3 more paragraphs
The four-cylinder diesel engine displaces 1,968 cm³, with a 3,640 mm wheelbase, a 2,040 mm width and a 5,990 mm length - the shorter of the two common wheelbase variants offered on this generation. Kerb weight of 2,347 kg leaves 1,153 kg of payload against the 3,500 kg gross weight, and the design top speed is 158 km/h.
As a class N1 panel van, the Crafter can be driven on a category B licence as long as the gross weight stays under 3.5 t. The shorter wheelbase variant stays more manoeuvrable in city traffic than the long chassis and is often used for parcel and courier delivery with frequent stops along tight urban routes.
When buying a used Crafter of this generation, it is worth checking the dual-mass flywheel and the injectors, since both parts wear under high delivery mileage. The sliding door rollers should run smoothly, and a complete service book with documented oil and timing belt changes should be verified before purchase.
Sources: SpecCodex-Register: Kennwerte des Modells CRAFTER
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 5,990 mmcorrect |
|---|---|
| Width | 2,040 mmcorrect |
| Wheelbase | 3,640 mmcorrect |
| Unladen weight | 2,347 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 158 km/hcorrect |
Frequently asked questions
How much does the Volkswagen/intrak CRAFTER weigh?
The unladen weight is 2,347 kg.
What is the gross vehicle weight of the Volkswagen/intrak CRAFTER?
3,500 kg.
What engine does the Volkswagen/intrak CRAFTER have?
4 cylinders, 1,968 cm³ displacement.
What are the dimensions of the Volkswagen/intrak CRAFTER?
5,990 mm × 2,040 mm.
When was the Volkswagen/intrak CRAFTER built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
