Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Volkswagen/carpol › Other models › CRAFTER

Volkswagen/carpol CRAFTER

Built: 2019-2024 · Series: Other models

More machines from model year 2019

Source: vw.carpol.pl

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Volkswagen/carpol CRAFTER is a vehicle built by Volkswagen/carpol. Production: 2019-2024. The engine has 4 cylinders, with a displacement of 1,968 cm³. The vehicle is 8,180 mm long and 2,250 mm wide. The unladen weight is 2,706 kg. The wheelbase measures 4,490 mm. Top speed is 158 km/h. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. Unladen weight within this group ranges from 74.2 to 23,550 kg; the CRAFTER sits at the bottom of that range with 2,706 kg. Its immediate neighbours are the MASTER 135.351 VAN L2 H2 C below it with 2,705 kg and the RAM 1500 LAMARIE above it with 2,707 kg. Gross vehicle weight within this group ranges from 540 to 48,000 kg; here the CRAFTER sits at the bottom of that range with 3,500 kg.

Volkswagen/Carpol – other models: the collective page of Carpol conversions on a VW Crafter base, Crafter and Kombi, 1,968 cm³ four-cylinder diesel engine, 2,151 to 2,706 kg, lengths up to 8,180 mm

This page gathers the conversions of the Polish coachbuilder Carpol on the base of the VW Crafter the register could not assign to a named range: the Crafter in its converted base form and a Kombi version for passenger transport. Both run the 1.968-litre four-cylinder diesel engine of the VW commercial-vehicle range.

Read on 4 more paragraphs

The register lists here 2 versions with 1,968 cm³ displacement from four cylinders, unladen weights of 2,151 to 2,706 kg, gross weights of 3,080 to 3,500 kg, lengths of 5,300 to 8,180 mm and widths of 1,900 to 2,250 mm.

Carpol is one of the Polish specialists for conversions on the base of VW commercial vehicles and converts the Crafter into, among others, Kombi and camper variants; the wide length span reaching over 8 metres shows that alongside standard bodies the register also holds lengthened special versions.

On such conversions, besides the condition of the VW drivetrain, rust on the underbody and wheel arches of the base vehicle, the professional execution of the conversion, and on Kombi variants the condition of seats, glazing and interior fit-out count; parts for the VW drivetrain run through the regular Volkswagen dealer network, conversion parts through Carpol.

The second-generation Crafter, developed jointly with MAN from 2017 and no longer technically related to the Mercedes-Benz Sprinter, is offered with either front-wheel or rear-wheel drive depending on payload trim; the front-wheel-drive version gives a lower loading floor for lighter conversions such as the Kombi variants, while the rear-wheel-drive version offers more reserve for the heaviest versions listed here, close to the 3.5-tonne limit.

Sources: SpecCodex register, model data: Volkswagen/Carpol

Technical data

Engine

Cylinders4correct
Displacement1,968 cm³correct

Dimensions and weights

Length8,180 mmcorrect
Width2,250 mmcorrect
Wheelbase4,490 mmcorrect
Unladen weight2,706 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed158 km/hcorrect

Frequently asked questions

How much does the Volkswagen/carpol CRAFTER weigh?

The unladen weight is 2,706 kg.

What is the gross vehicle weight of the Volkswagen/carpol CRAFTER?

3,500 kg.

What engine does the Volkswagen/carpol CRAFTER have?

4 cylinders, 1,968 cm³ displacement.

What are the dimensions of the Volkswagen/carpol CRAFTER?

8,180 mm × 2,250 mm.

When was the Volkswagen/carpol CRAFTER built?

Production years: 2019-2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare