Van Holten VHA 9-9
Built: 2006-2008 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Van Holten – other models: the collective page for semi-trailers outside the named ranges, VHA and VHO types, 5,120 to 12,380 kg kerb weight, 18,000 to 36,000 kg gross vehicle weight
This page gathers semi-trailers from the Van Holten brand that the register could not assign to a named series. The type designations VHA 10-10, VHA 10-18 and VHA 9-9, as well as VHO 24/12 and VHO 28/9.5, combine the manufacturer's initials with number pairs indicating the axle count and capacity of the respective version. Semi-trailers of this size are usually built in small series and tailored to the requirements of hauliers handling heavy and special transport.
Read on 3 more paragraphs
The register lists five versions here with kerb weights from 5,120 to 12,380 kg and gross vehicle weights from 18,000 to 36,000 kg. Lengths range from 9,770 to 13,880 mm, widths from 2,530 to 2,550 mm.
With gross weights up to 36 tonnes, these semi-trailers count among the heavy units for machinery and heavy-load transport in road freight. The range from 18 to 36 tonnes gross vehicle weight covers both classic low-loader duties and the transport of large construction machines and plant components.
When buying a used Van Holten semi-trailer, check the chassis and kingpin, the condition of the axles and braking system including ABS/EBS, and on versions with ramps or hydraulics their function. Spare parts are available through the European commercial vehicle parts trade. A look at any available service records and the data plate rounds off the pre-purchase inspection.
Sources: SpecCodex register, model data: Van Holten (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,050 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 1,810 mmcorrect |
| Unladen weight | 6,830 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Van Holten VHA 9-9 weigh?
The unladen weight is 6,830 kg.
What is the gross vehicle weight of the Van Holten VHA 9-9?
18,000 kg.
Up to what speed is the Van Holten VHA 9-9 approved?
Approved up to 100 km/h.
What are the dimensions of the Van Holten VHA 9-9?
10,050 mm × 2,550 mm.
When was the Van Holten VHA 9-9 built?
Production years: 2006-2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
