Valtra/valmet 8150 (4900 kg)
Built: 1995–2004 · Series: 8050 MEGA-Baureihe
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valtra/Valmet 8050 Mega range – the six-cylinder big tractors from Linnavuori: 8050 to 8750, rated speed 1,800 to 2,200 rpm, 80.9 to 117.7 kW, unladen weight 4,740 to 6,490 kg
The 8000 Mega was the big six-cylinder range of Valmet, the Finnish tractor maker from Suolahti with its engine plant in Linnavuori, which only renamed the brand Valtra in 1997 after the sale to Sisu. From the late 1980s the Mega range formed the top of the line above the four-cylinder ranges: the first digit 8 marks the big-tractor class, the following digits the step within the range – 8050 as the smallest, 8750 as the largest version. The engines are Valmet's own six-cylinders from the Linnavuori plant, which has supplied the brand's engines ever since – first as Valmet, then as Sisu, since 2004 as AGCO Power.
Read on 3 more paragraphs
The register lists here 6 versions with 80.9 to 117.7 kW from six-cylinders of 6,593 to 7,365 cm³, torque from 461 to 691 Nm at rated speeds of 1,800 to 2,200 rpm, unladen weights from 4,740 to 6,490 kg, lengths from 4,757 to 5,720 mm, widths from 2,155 to 2,355 mm and heights from 2,750 to 2,825 mm.
The Mega range was Valmet's answer to the big six-cylinder tractors of Fiat, Ford and Massey Ferguson and was aimed at arable farms in Scandinavia and the export markets Valmet supplied from its second plant in Brazil; it stood at the transition from purely hydraulic to electronically assisted tractor control, which the following HiTech version completed.
On used tractors, operating hours and the condition of the six-cylinder, hydraulic tightness, the condition of cab and mudguards, transmission and PTO count; spares, since Valmet merged into Valtra via Sisu, now run through the Valtra and AGCO network.
Sources: SpecCodex register, model data: Valtra/Valmet 8050 Mega-Baureihe, Valtra (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 125 hp (91.9 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 492 Nmcorrect |
| Speed at max. torque | 1,199 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 6,593 cm³correct |
| Bore | 108 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 16.5correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,840 mmcorrect |
|---|---|
| Width | 2,155 mmcorrect |
| Height | 2,790 mmcorrect |
| Wheelbase | 2,558 mmcorrect |
| Ground clearance | 440 mmcorrect |
| Unladen weight | 4,900 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 36 V/36 Rcorrect |
| Front tyres | 16.9 R 28 AScorrect |
| Rear tyres | 20.8 R 38 AScorrect |
| Top speed | 40 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 18.8 kW/t (92 kW / 4.9 t)
Power class: Large (100–180 hp)
Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valtra/valmet 8150 have?
The Valtra/valmet 8150 delivers 125 hp.
How much does the Valtra/valmet 8150 weigh?
The unladen weight is 4,900 kg.
What engine does the Valtra/valmet 8150 have?
6 cylinders, 6,593 cm³ displacement, Diesel.
How fast does the Valtra/valmet 8150 go?
Top speed is 40 km/h.
What are the dimensions of the Valtra/valmet 8150?
4,840 mm × 2,155 mm × 2,790 mm.
When was the Valtra/valmet 8150 built?
Production years: 1995–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
