Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valtra S352 › S352

Valtra S352

Built: 2008–2011ß · Series: S (2. Serie)

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The S (2. Serie) series from Valtra S352 includes the S352. Production: 2008–2011ß. The engine delivers 340 hp (250 kW), has 6 cylinders, with a displacement of 8,400 cm³. The machine is 4,745 mm long, 2,550 mm wide and 3,380 mm high. The unladen weight is 10,500 kg. The wheelbase measures 3,105 mm. Ground clearance is 472 mm. Top speed is 50 km/h. Tyres: front 600/65R34, rear 710/75R42. Rated output within this group ranges from 2 to 760 hp; the S352 sits in the middle of that range with 340 hp. Its immediate neighbours are the 8335RT below it with 339.6 hp and the 832 Vario above it with 343 hp. Rated output within this group ranges from 1.9 to 559 kW; here the S352 sits in the middle of that range with 250 kW.

S352 (S series, 2nd generation) by Valtra: six-cylinder diesel engine rated at 250 kW (340 hp) with four-wheel drive, built between 2008 and 2011.

The second generation of the S series formed Valtra's class of heavy, powerful standard tractors from the Finnish manufacturer, part of the AGCO group, which represented the upper power segment with this line.

Read on 3 more paragraphs

The S352 is powered by a six-cylinder diesel engine of 8,400 cm³ displacement, delivering 250 kW (340 hp). At an unladen weight of 10,500 kg, 472 mm of ground clearance, a wheelbase of 3,105 mm and a top speed of 50 km/h, the four-wheel-drive tractor combines strong pulling power with brisk road transport.

The generous 472 mm ground clearance and 600/65R34 front and 710/75R42 rear tyres show the design typical of heavy standard tractors in this class for large tyre dimensions, which improve both pulling power and soil protection at once. The four-wheel drive further increases pulling power on difficult ground.

On a used S352, it is worth looking at the exhaust after-treatment system and the four-wheel-drive components for wear, since such a powerful six-cylinder engine with four-wheel drive places heavy loads on the drivetrain and emissions technology. The large tyres should also be checked for even wear. Complete documentation of earlier repairs further helps in judging the machine's true condition. Hoses and lines should also be checked for material fatigue after so many years of service.

Sources: SpecCodex-Register: Kennwerte des Modells S352

Technical data

Engine

Power340 hp (250 kW)correct
Cylinders6correct
Displacement8,400 cm³correct

Dimensions and weights

Length4,745 mmcorrect
Width2,550 mmcorrect
Height3,380 mmcorrect
Wheelbase3,105 mmcorrect
Ground clearance472 mmcorrect
Unladen weight10,500 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Front tyres600/65R34correct
Rear tyres710/75R42correct
Top speed50 km/hcorrect

Where this model stands

Power-to-weight ratio: 23.8 kW/t (250 kW / 10.5 t)

Power class: Heavy (> 180 hp)

Stronger than 98% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valtra S352 S352 have?

The Valtra S352 S352 delivers 340 hp.

How much does the Valtra S352 S352 weigh?

The unladen weight is 10,500 kg.

What engine does the Valtra S352 S352 have?

6 cylinders, 8,400 cm³ displacement.

How fast does the Valtra S352 S352 go?

Top speed is 50 km/h.

What are the dimensions of the Valtra S352 S352?

4,745 mm × 2,550 mm × 3,380 mm.

When was the Valtra S352 S352 built?

Production years: 2008–2011ß.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare