Start › Tractors › Valtra › S292

Valtra S292

Built: 2008–2011 · Series: S (2. Serie)

More machines from model year 2008

Source: https://www.xn--raiffeisen-brse-ktb.de/gebraucht/traktor-357

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Valtra S292 belongs to the S (2. Serie) series. Production: 2008–2011. The engine delivers 290 hp (213.3 kW), has 6 cylinders, with a displacement of 8,400 cm³. The machine is 4,745 mm long, 2,550 mm wide and 3,380 mm high. The unladen weight is 10,500 kg. The wheelbase measures 3,105 mm. Ground clearance is 472 mm. Top speed is 40 km/h. The tank holds 590 litres. Tyres: front 600/65R34, rear 710/75R42. The PTO runs at 1000 rpm. The S (2. Serie) series covers 4 models. Rated output within it ranges from 240 to 315 hp; the S292 sits in the upper part of that range with 290 hp. Its immediate neighbours are the S262 below it with 265 hp and the S322 above it with 315 hp. 782 Valtra models across 32 series are on record.

Valtra S (2nd series) – large tractors S232, S262, S292 and S322 since 2009, six-cylinder engines with 8.4 litres displacement, 177 to 232 kW, unladen weight 10.5 t, gross weight up to 18 t

The second generation of the Valtra S series replaced the first version of Valtra's largest range from 2009 and, as an AGCO large tractor, shares its technical base with sister group Fendt, also part of AGCO. The S232 to S322 type numbers roughly reflect engine power in horsepower and rise across this series from 232 to 322. The S series is built at Valtra's Finnish plant, part of the group since AGCO's takeover in 2004.

Read on 3 more paragraphs

The register lists four versions here with 176.5 to 231.7 kW from six-cylinder engines with a uniform 8,400 cm³ displacement. Rated speed is 2,200 rpm, unladen weight is 10,500 kg with a gross vehicle weight of up to 18,000 kg, length is 4,745 mm, width is 2,550 mm and height is 3,380 mm.

With outputs of over 230 kW and a gross weight of 18 tonnes, the S series sits at the top end of the tractor market for large arable farms and contractors, competing there with the large tractors from Fendt, Case IH and John Deere.

When buying used, in this weight class check the condition of the front axle suspension, tightness of the hydraulic system and PTO, wear on the clutch and gearbox, and tyre wear given the high draft loads. Parts and service run through the Valtra dealer network under AGCO.

Sources: SpecCodex register, model data: Valtra S (2. Serie), Valtra (AGCO, Hersteller)

Technical data

Engine

Power	290 hp (213.3 kW)correct
Cylinders	6correct
Displacement	8,400 cm³correct

Dimensions and weights

Length	4,745 mmcorrect
Width	2,550 mmcorrect
Height	3,380 mmcorrect
Wheelbase	3,105 mmcorrect
Ground clearance	472 mmcorrect
Unladen weight	10,500 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Front tyres	600/65R34correct
Rear tyres	710/75R42correct
Top speed	40 km/hcorrect

Working data

Fuel tank capacity	590 lcorrect

Other data

PTO speed	1,000 rpmcorrect

Where this model stands

Power-to-weight ratio: 20.3 kW/t (213 kW / 10.5 t)

Power class: Heavy (> 180 hp)

Stronger than 96% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valtra S292 have?

The Valtra S292 delivers 290 hp.

How much does the Valtra S292 weigh?

The unladen weight is 10,500 kg.

What engine does the Valtra S292 have?

6 cylinders, 8,400 cm³ displacement.

How fast does the Valtra S292 go?

Top speed is 40 km/h.

What are the dimensions of the Valtra S292?

4,745 mm × 2,550 mm × 3,380 mm.

When was the Valtra S292 built?

Production years: 2008–2011.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →