Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valmet › VALTRA 700-4

Valmet VALTRA 700-4

Built: 2001 · Series: Other models

More machines from model year 2001

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The VALTRA 700-4 comes from Valmet. Production: 2001. The engine delivers 51 kW, with a displacement of 3,300 cm³. The machine is 3,850 mm long and 1,940 mm wide. The unladen weight is 3,520 kg. The gearbox offers 8 gears. Rated output across the Valmet range ranges from 11 to 193.9 kW; the VALTRA 700-4 sits in the lower part of that range with 51 kW. Its immediate neighbours are the 505-4 below it with 50 kW and the 465 (465-4) above it with 51.5 kW. Unladen weight across the Valmet range ranges from 780 to 43,850 kg; here the VALTRA 700-4 sits at the bottom of that range with 3,520 kg. 414 Valmet models across 21 series are on record.

Valmet – other models: the collective page of the Finnish and Brazilian tractors outside the named ranges, from the Valmet 15 and 20 of the 1950s through the 361 D, 502 and 705 to the Brazilian 65

This page gathers the Valmet tractors the register could not assign to a named range – the Finnish state group Valtion Metallitehtaat that built Finland's first tractor in 1951 in Tourula near Jyväskylä with the Valmet 15, moved tractor production to Suolahti in 1969 and in 1960 founded a second tractor plant in Mogi das Cruzes near São Paulo, which still produces today as Valtra do Brasil. The type logic: the early models 15, 20 and 33 give the hp class, the three-digit 359, 361, 502, 565, 702 and 705 of the 1960s and 1970s the size in the first digit and the generation in the following ones, D the diesel, -4 four-wheel drive; the Brazilian 65, 85, 118 and 148 give the hp class, and the 118 Alcool is a tractor with ethanol engine from the Brazilian alcohol programme of the 1980s – noted in the register as fuel Alcohol. The engines are Valmet's own from Linnavuori, in Brazil MWM diesels built under licence; in 1997 the name passed to Valtra with the sale to Sisu.

Read on 3 more paragraphs

The register lists here 179 versions with 11 to 140 kW from three- to six-cylinders of 1,400 to 7,400 cm³, torque from 157 to 691 Nm, unladen weights from 780 to 12,000 kg, gross weights from 1,250 to 20,000 kg, lengths from 2,500 to 5,720 mm, widths from 1,120 to 2,680 mm and heights from 1,350 to 3,100 mm.

Valmet was the tractor of Finnish farming and forestry and is still one of the big brands in Brazil today; the 6000s and 8000s of the 1990s laid the foundation for Valtra's success in Western Europe.

On used tractors, originality and engine condition count on the classics, clutch, gearbox and hydraulics on the 500s and 700s, HiShift shuttle and electronics on the 6000s; parts run through Valtra and AGCO, in Brazil through Valtra do Brasil.

Sources: SpecCodex register, model data: Valmet (weitere Modelle), Valtra (AGCO, Rechtsnachfolger Valmet)

Technical data

Engine

Power51 kWcorrect
Displacement3,300 cm³correct

Dimensions and weights

Length3,850 mmcorrect
Width1,940 mmcorrect
Unladen weight3,520 kgcorrect

Drivetrain and chassis

Gears8correct

Where this model stands

Power-to-weight ratio: 14.5 kW/t (51 kW / 3.5 t)

Power class: Universal (40–100 hp)

Stronger than 47% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet VALTRA 700-4 have?

The Valmet VALTRA 700-4 delivers 51 kW.

How much does the Valmet VALTRA 700-4 weigh?

The unladen weight is 3,520 kg.

What engine does the Valmet VALTRA 700-4 have?

3,300 cm³ displacement.

What are the dimensions of the Valmet VALTRA 700-4?

3,850 mm × 1,940 mm.

When was the Valmet VALTRA 700-4 built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare