Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valmet › Other models › VALMET-VALTRA 6300-4

Valmet VALTRA 6300-4

Built: 1998 · Series: Other models

More machines from model year 1998

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Valmet-VALTRA 6300-4 is a machine built by Valmet. Production: 1998. The engine delivers 62 kW, has 4 cylinders, with a displacement of 4,399 cm³. The machine is 4,440 mm long and 2,540 mm wide. The unladen weight is 4,645 kg. The gross vehicle weight is 8,000 kg. Rated output across the Valmet range ranges from 11 to 193.9 kW; the VALMET-VALTRA 6300-4 sits in the lower part of that range with 62 kW. Its immediate neighbours are the VALMET 705 below it with 61 kW and the 88 ID above it with 63 kW. Unladen weight across the Valmet range ranges from 780 to 43,850 kg; here the VALMET-VALTRA 6300-4 sits at the bottom of that range with 4,645 kg. 414 Valmet models across 21 series are on record.

Valmet – other models: the collective page of the Finnish and Brazilian tractors outside the named ranges, from the Valmet 15 and 20 of the 1950s through the 361 D, 502 and 705 to the Brazilian 65

This page gathers the Valmet tractors the register could not assign to a named range – the Finnish state group Valtion Metallitehtaat that built Finland's first tractor in 1951 in Tourula near Jyväskylä with the Valmet 15, moved tractor production to Suolahti in 1969 and in 1960 founded a second tractor plant in Mogi das Cruzes near São Paulo, which still produces today as Valtra do Brasil. The type logic: the early models 15, 20 and 33 give the hp class, the three-digit 359, 361, 502, 565, 702 and 705 of the 1960s and 1970s the size in the first digit and the generation in the following ones, D the diesel, -4 four-wheel drive; the Brazilian 65, 85, 118 and 148 give the hp class, and the 118 Alcool is a tractor with ethanol engine from the Brazilian alcohol programme of the 1980s – noted in the register as fuel Alcohol. The engines are Valmet's own from Linnavuori, in Brazil MWM diesels built under licence; in 1997 the name passed to Valtra with the sale to Sisu.

Read on 3 more paragraphs

The register lists here 179 versions with 11 to 140 kW from three- to six-cylinders of 1,400 to 7,400 cm³, torque from 157 to 691 Nm, unladen weights from 780 to 12,000 kg, gross weights from 1,250 to 20,000 kg, lengths from 2,500 to 5,720 mm, widths from 1,120 to 2,680 mm and heights from 1,350 to 3,100 mm.

Valmet was the tractor of Finnish farming and forestry and is still one of the big brands in Brazil today; the 6000s and 8000s of the 1990s laid the foundation for Valtra's success in Western Europe.

On used tractors, originality and engine condition count on the classics, clutch, gearbox and hydraulics on the 500s and 700s, HiShift shuttle and electronics on the 6000s; parts run through Valtra and AGCO, in Brazil through Valtra do Brasil.

Sources: SpecCodex register, model data: Valmet (weitere Modelle), Valtra (AGCO, Rechtsnachfolger Valmet)

Technical data

Engine

Power62 kWcorrect
Cylinders4correct
Displacement4,399 cm³correct

Dimensions and weights

Length4,440 mmcorrect
Width2,540 mmcorrect
Unladen weight4,645 kgcorrect
Gross vehicle weight8,000 kgcorrect

Where this model stands

Power-to-weight ratio: 13.3 kW/t (62 kW / 4.6 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet VALTRA 6300-4 have?

The Valmet VALTRA 6300-4 delivers 62 kW.

How much does the Valmet VALTRA 6300-4 weigh?

The unladen weight is 4,645 kg.

What is the gross vehicle weight of the Valmet VALTRA 6300-4?

8,000 kg.

What engine does the Valmet VALTRA 6300-4 have?

4 cylinders, 4,399 cm³ displacement.

What are the dimensions of the Valmet VALTRA 6300-4?

4,440 mm × 2,540 mm.

When was the Valmet VALTRA 6300-4 built?

Production years: 1998.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare