Valmet 8750
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Valmet 8750 is a tractor within the Valmet range. It is equipped with a 6‑cylinder engine of 7 365 cm³ displacement; the production period is not specified in the available data. The machine measures 4 937 mm in length, 2 178 mm in width and 2 785 mm in height, with a curb weight of 5 360 kg. It features a gearbox with 36 forward and 36 reverse gears and a fuel tank capacity of 165 l. The rated engine speed is 2 200 U/min, the maximum torque is 691 Nm, and it falls into the Cat III power‑lift category.
From a technical perspective, the 2 200 U/min rated speed combined with 691 Nm of torque provides high pulling and working torque, which is advantageous for heavy field tasks such as plowing or harrowing. The large 7 365 cm³ displacement supports sustained power output under heavy loads, while the 36‑step forward gearbox allows fine speed selection to match varying soil conditions. The curb weight of 5 360 kg gives sufficient ground pressure for traction without excessive soil compaction. The 165‑liter tank enables long operation periods, reducing the need for frequent refuelling during extensive field work.
As no comparative data are provided for the series, the Valmet 8750 cannot be placed in a ranking relative to other models. The tractor is suited for demanding agricultural operations that require high power, extensive gear range and a high lift capacity. It is typically used with heavy implements and in situations where substantial ground pressure and long uninterrupted operating times are important.
Valmet – other models: the collective page of the Finnish and Brazilian tractors outside the named ranges, from the Valmet 15 and 20 of the 1950s through the 361 D, 502 and 705 to the Brazilian 65
This page gathers the Valmet tractors the register could not assign to a named range – the Finnish state group Valtion Metallitehtaat that built Finland's first tractor in 1951 in Tourula near Jyväskylä with the Valmet 15, moved tractor production to Suolahti in 1969 and in 1960 founded a second tractor plant in Mogi das Cruzes near São Paulo, which still produces today as Valtra do Brasil. The type logic: the early models 15, 20 and 33 give the hp class, the three-digit 359, 361, 502, 565, 702 and 705 of the 1960s and 1970s the size in the first digit and the generation in the following ones, D the diesel, -4 four-wheel drive; the Brazilian 65, 85, 118 and 148 give the hp class, and the 118 Alcool is a tractor with ethanol engine from the Brazilian alcohol programme of the 1980s – noted in the register as fuel Alcohol. The engines are Valmet's own from Linnavuori, in Brazil MWM diesels built under licence; in 1997 the name passed to Valtra with the sale to Sisu.
Read on 3 more paragraphs
The register lists here 179 versions with 11 to 140 kW from three- to six-cylinders of 1,400 to 7,400 cm³, torque from 157 to 691 Nm, unladen weights from 780 to 12,000 kg, gross weights from 1,250 to 20,000 kg, lengths from 2,500 to 5,720 mm, widths from 1,120 to 2,680 mm and heights from 1,350 to 3,100 mm.
Valmet was the tractor of Finnish farming and forestry and is still one of the big brands in Brazil today; the 6000s and 8000s of the 1990s laid the foundation for Valtra's success in Western Europe.
On used tractors, originality and engine condition count on the classics, clutch, gearbox and hydraulics on the 500s and 700s, HiShift shuttle and electronics on the 6000s; parts run through Valtra and AGCO, in Brazil through Valtra do Brasil.
Sources: SpecCodex register, model data: Valmet (weitere Modelle), Valtra (AGCO, Rechtsnachfolger Valmet)
Technical data
Engine
| Rated speed | 2,200 rpmcorrect |
|---|---|
| Torque | 691 Nmcorrect |
| Cylinders | 6correct |
| Displacement | 7,365 cm³correct |
Dimensions and weights
| Length | 4,937 mmcorrect |
|---|---|
| Width | 2,178 mmcorrect |
| Height | 2,785 mmcorrect |
| Unladen weight | 5,360 kgcorrect |
Drivetrain and chassis
| Gearbox | 36 V/36 Rcorrect |
|---|---|
| Forward gears | 36correct |
Working data
| Fuel tank capacity | 165 lcorrect |
|---|
Other data
| Linkage category | Cat IIIcorrect |
|---|
Frequently asked questions
How much does the Valmet 8750 weigh?
The unladen weight is 5,360 kg.
What engine does the Valmet 8750 have?
6 cylinders, 7,365 cm³ displacement.
What are the dimensions of the Valmet 8750?
4,937 mm × 2,178 mm × 2,785 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.