Valmet 6250
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Valmet 6250 is a tractor from the Finnish manufacturer Valmet, belonging to the unspecified series of Valmet tractors. It is powered by a four‑cylinder diesel engine with a displacement of 4 397 cm³ that delivers 80 hp (55.2 kW) at a rated speed of 2 200 rpm. The maximum torque is 360 Nm. The machine measures 4 475 mm in length, 2 179 mm in width and 2 771 mm in height, has a wheelbase of 2 326 mm and a curb weight of 4 399 kg. The transmission provides 36 forward and 36 reverse gears, with a power take‑off speed of 540/1 000 rpm, and the power lift is classified as Cat II. Fuel tank capacity is 165 l.
With 80 hp the Valmet 6250 can reliably drive medium‑size implements such as ploughs, harrows or mulchers, while the 360 Nm torque gives strong low‑speed pulling power. The 36 forward gears allow fine adjustment of travel speed to suit varying field conditions. A curb weight of 4 399 kg results in moderate soil pressure, limiting compaction, and the compact dimensions aid road transport. The large 165 l tank enables long work periods without frequent refuelling.
Tractors of this size and class are typically used on medium to large farms for field operations such as soil preparation, seeding and handling harvest equipment. The extensive gear range and robust torque make them suitable for tasks that require both precise speed control and sustained pulling effort, such as hauling heavy implements over extended distances.
Valmet – other models: the collective page of the Finnish and Brazilian tractors outside the named ranges, from the Valmet 15 and 20 of the 1950s through the 361 D, 502 and 705 to the Brazilian 65
This page gathers the Valmet tractors the register could not assign to a named range – the Finnish state group Valtion Metallitehtaat that built Finland's first tractor in 1951 in Tourula near Jyväskylä with the Valmet 15, moved tractor production to Suolahti in 1969 and in 1960 founded a second tractor plant in Mogi das Cruzes near São Paulo, which still produces today as Valtra do Brasil. The type logic: the early models 15, 20 and 33 give the hp class, the three-digit 359, 361, 502, 565, 702 and 705 of the 1960s and 1970s the size in the first digit and the generation in the following ones, D the diesel, -4 four-wheel drive; the Brazilian 65, 85, 118 and 148 give the hp class, and the 118 Alcool is a tractor with ethanol engine from the Brazilian alcohol programme of the 1980s – noted in the register as fuel Alcohol. The engines are Valmet's own from Linnavuori, in Brazil MWM diesels built under licence; in 1997 the name passed to Valtra with the sale to Sisu.
Read on 3 more paragraphs
The register lists here 179 versions with 11 to 140 kW from three- to six-cylinders of 1,400 to 7,400 cm³, torque from 157 to 691 Nm, unladen weights from 780 to 12,000 kg, gross weights from 1,250 to 20,000 kg, lengths from 2,500 to 5,720 mm, widths from 1,120 to 2,680 mm and heights from 1,350 to 3,100 mm.
Valmet was the tractor of Finnish farming and forestry and is still one of the big brands in Brazil today; the 6000s and 8000s of the 1990s laid the foundation for Valtra's success in Western Europe.
On used tractors, originality and engine condition count on the classics, clutch, gearbox and hydraulics on the 500s and 700s, HiShift shuttle and electronics on the 6000s; parts run through Valtra and AGCO, in Brazil through Valtra do Brasil.
Sources: SpecCodex register, model data: Valmet (weitere Modelle), Valtra (AGCO, Rechtsnachfolger Valmet)
Technical data
Engine
| Power | 80 hp (55.2 kW)correct |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Torque | 360 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 4,397 cm³correct |
Dimensions and weights
| Length | 4,475 mmcorrect |
|---|---|
| Width | 2,179 mmcorrect |
| Height | 2,771 mmcorrect |
| Wheelbase | 2,326 mmcorrect |
| Unladen weight | 4,399 kgcorrect |
Drivetrain and chassis
| Gearbox | 36 V/36 Rcorrect |
|---|---|
| Forward gears | 36correct |
Working data
| Fuel tank capacity | 165 lcorrect |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 12.5 kW/t (55 kW / 4.4 t)
Power class: Universal (40–100 hp)
Stronger than 52% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet 6250 have?
The Valmet 6250 delivers 80 hp.
How much does the Valmet 6250 weigh?
The unladen weight is 4,399 kg.
What engine does the Valmet 6250 have?
4 cylinders, 4,397 cm³ displacement.
What are the dimensions of the Valmet 6250?
4,475 mm × 2,179 mm × 2,771 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.