Technical register for agricultural, construction and commercial machinery · sourced data
Start › Harvesters › Valmet › Other models › 911.3

Valmet 911.3 – specifications

Series: Other models

Build year not documented · Data origin: Official register, Directory data · sources

Source: belstanok.ru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Used listings – figures from public listings

In November 2026, speccodex recorded 41 public used-machine listings for Valmet 911.3 on one platform. Asking prices ranged from €31,422 to €58,603 (median €52,250), years of manufacture between 2004 and 2008.

Operating hours stated in the listings (median) by machine age: over 12 years: 18,900 h (8 listings).

Offered mainly in Germany (66%), Lithuania (10%) and Sweden (10%); shares refer to listings that state a location.

Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 22 Nov 2026. Sellers usually do not state whether prices are net or gross.

How much does a used Valmet 911.3 cost? Asking prices from public listings

Area: Machines

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 1 individual figure for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.‌​⁠⁠​‌​⁠​⁠⁠‍‌⁠‌​‍‌⁠​

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Latvian open data portal (retrieved August 2026) · lectura-specs.com (retrieved August 2026) · Data sources and cross-checks

Harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare