Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus/zm › Other models › C-362

Ursus/zm C-362

Built: 1976–1987 · Series: Other models

More machines from model year 1976

The photo shows the C-355 P from the same series. Source: tractordata.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the C-362, Ursus/zm offers a model from the Pozostałe modele series. Production: 1976–1987. The engine delivers 52 hp (38.2 kW), has 4 cylinders, with a displacement of 3,119 cm³. Torque is 180 Nm. Rated speed is 2,200 rpm. The machine is 3,630 mm long, 1,670 mm wide and 2,690 mm high. The unladen weight is 2,624 kg. The wheelbase measures 2,160 mm. Ground clearance is 395 mm. Top speed is 27 km/h. Transmission: 10 V/2 R. The engine is water-cooled. Tyres: front 7.50-16 ASF, rear 12.4-36 AS. The fuel is diesel. The bore measures 95 mm. The stroke is 110 mm. The compression ratio is 17:1. Maximum torque is reached at 1,650 rpm. Construction: unit construction (no separate frame). Around 1.674 units were built. Rated output across the Ursus/zm range ranges from 45 to 52 hp; the C-362 sits at the top of that range with 52 hp. Its immediate neighbours are the C-355 P below it with 50 hp. Rated output across the Ursus/zm range ranges from 33.1 to 38.2 kW; here the C-362 sits at the top of that range with 38.2 kW. 5 Ursus/zm models are on record.

Ursus ZM – other models: the collective page of Zakłady Mechaniczne Ursus, C-350 to C-362 with the most widely built C-360, 33 to 38 kW

This page gathers the tractors of Zakłady Mechaniczne Ursus (Ursus ZM) the register could not assign to a named range – the C-350 range, whose best-known model, the C-360, is among the most widely built tractors in Poland. The types C-350, C-355 P, C-360, C-360 3P and C-362 follow Ursus's typical C numbering; P and 3P mark equipment variants.

Read on 3 more paragraphs

The register lists here 5 versions with 33.1 to 38.2 kW from three- to four-cylinders of 2,502 to 3,119 cc, unladen weights from 2,056 to 2,624 kg, lengths from 3,250 to 3,630 mm, widths from 1,670 to 1,800 mm and heights from 1,620 to 2,690 mm, torque from 165 to 193 Nm at rated speeds of 2,000 to 2,250 rpm.

The Ursus C-360 and its sister models were, for decades, the standard tractors of Polish agriculture and are still in use in large numbers on Polish farms today; their simple, sturdy design also made them suitable for export to other Eastern Bloc countries.

On the C-350 range, what counts is the condition and compression of the three- or four-cylinder diesel, the condition of clutch and gearbox, the tightness of the hydraulics, and rust on bodywork and cab; since these models were built in very large numbers, parts are still widely available in Poland today, as well as the working order of the lighting, instruments, cab heating and the tightness of the windows.

Sources: SpecCodex register, model data: Ursus ZM (weitere Modelle), Ursus (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power52 hp (38.2 kW)correct
Rated speed2,200 rpmcorrect
Torque180 Nmcorrect
Speed at max. torque1,650 rpmcorrect
Cylinders4correct
Displacement3,119 cm³correct
Bore95 mmcorrect
Stroke110 mmcorrect
Compression ratio17correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,630 mmcorrect
Width1,670 mmcorrect
Height2,690 mmcorrect
Wheelbase2,160 mmcorrect
Ground clearance395 mmcorrect
Unladen weight2,624 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox10 V/2 Rcorrect
Front tyres7.50-16 ASFcorrect
Rear tyres12.4-36 AScorrect
Top speed27 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built1,674correct

Where this model stands

Power-to-weight ratio: 14.6 kW/t (38 kW / 2.6 t)

Power class: Universal (40–100 hp)

Stronger than 36% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ursus/zm C-362 have?

The Ursus/zm C-362 delivers 52 hp.

How much does the Ursus/zm C-362 weigh?

The unladen weight is 2,624 kg.

What engine does the Ursus/zm C-362 have?

4 cylinders, 3,119 cm³ displacement, Diesel.

How fast does the Ursus/zm C-362 go?

Top speed is 27 km/h.

What are the dimensions of the Ursus/zm C-362?

3,630 mm × 1,670 mm × 2,690 mm.

When was the Ursus/zm C-362 built?

Production years: 1976–1987.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare