Start › Tractors › Ursus/zm › Other models › C-360 3P

Ursus/zm C-360 3P

Built: 1981–1993 · Series: Other models

More machines from model year 1981

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ursus/zm C-360 3P belongs to the Pozostałe modele series. Production: 1981–1993. The engine delivers 47.5 hp (34.9 kW), has 3 cylinders, with a displacement of 2,502 cm³. Torque is 165 Nm. Rated speed is 2,250 rpm. The machine is 3,610 mm long, 1,800 mm wide and 2,050 mm high. The unladen weight is 2,056 kg. The wheelbase measures 2,172 mm. Ground clearance is 440 mm. Top speed is 25 km/h. Transmission: 10 V/2 R. The engine is water-cooled. Tyres: front 6.00-16 ASF, rear 14.9-28 AS. The fuel is diesel. The bore measures 91.44 mm. The stroke is 127 mm. The compression ratio is 16.5:1. Maximum torque is reached at 1,300 rpm. Construction: unit construction (no separate frame). Rated output across the Ursus/zm range ranges from 45 to 52 hp; the C-360 3P sits in the lower part of that range with 47.5 hp. Its immediate neighbours are the C-350 below it with 45 hp and the C-355 P above it with 50 hp. Rated output across the Ursus/zm range ranges from 33.1 to 38.2 kW; here the C-360 3P sits in the lower part of that range with 34.9 kW. 5 Ursus/zm models are on record.

Ursus ZM – other models: the collective page of Zakłady Mechaniczne Ursus, C-350 to C-362 with the most widely built C-360, 33 to 38 kW

This page gathers the tractors of Zakłady Mechaniczne Ursus (Ursus ZM) the register could not assign to a named range – the C-350 range, whose best-known model, the C-360, is among the most widely built tractors in Poland. The types C-350, C-355 P, C-360, C-360 3P and C-362 follow Ursus's typical C numbering; P and 3P mark equipment variants.

Read on 3 more paragraphs

The register lists here 5 versions with 33.1 to 38.2 kW from three- to four-cylinders of 2,502 to 3,119 cc, unladen weights from 2,056 to 2,624 kg, lengths from 3,250 to 3,630 mm, widths from 1,670 to 1,800 mm and heights from 1,620 to 2,690 mm, torque from 165 to 193 Nm at rated speeds of 2,000 to 2,250 rpm.

The Ursus C-360 and its sister models were, for decades, the standard tractors of Polish agriculture and are still in use in large numbers on Polish farms today; their simple, sturdy design also made them suitable for export to other Eastern Bloc countries.

On the C-350 range, what counts is the condition and compression of the three- or four-cylinder diesel, the condition of clutch and gearbox, the tightness of the hydraulics, and rust on bodywork and cab; since these models were built in very large numbers, parts are still widely available in Poland today, as well as the working order of the lighting, instruments, cab heating and the tightness of the windows.

Sources: SpecCodex register, model data: Ursus ZM (weitere Modelle), Ursus (manufacturer)

Technical data

Engine

Fuel	dieselcorrect
Power	47.5 hp (34.9 kW)correct
Rated speed	2,250 rpmcorrect
Torque	165 Nmcorrect
Speed at max. torque	1,300 rpmcorrect
Cylinders	3correct
Displacement	2,502 cm³correct
Bore	91.44 mmcorrect
Stroke	127 mmcorrect
Compression ratio	16.5correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,610 mmcorrect
Width	1,800 mmcorrect
Height	2,050 mmcorrect
Wheelbase	2,172 mmcorrect
Ground clearance	440 mmcorrect
Unladen weight	2,056 kgcorrect

Drivetrain and chassis

Drive	rear-wheel drivecorrect
Gearbox	10 V/2 Rcorrect
Front tyres	6.00-16 ASFcorrect
Rear tyres	14.9-28 AScorrect
Top speed	25 km/hcorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 17 kW/t (35 kW / 2.1 t)

Power class: Universal (40–100 hp)

Stronger than 31% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ursus/zm C-360 3P have?

The Ursus/zm C-360 3P delivers 47.5 hp.

How much does the Ursus/zm C-360 3P weigh?

The unladen weight is 2,056 kg.

What engine does the Ursus/zm C-360 3P have?

3 cylinders, 2,502 cm³ displacement, Diesel.

How fast does the Ursus/zm C-360 3P go?

Top speed is 25 km/h.

What are the dimensions of the Ursus/zm C-360 3P?

3,610 mm × 1,800 mm × 2,050 mm.

When was the Ursus/zm C-360 3P built?

Production years: 1981–1993.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →