Ursus 1234 (85.3 kW)
Built: 1990–2009 · Series: 30 er-Serie
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ursus 30 series – the big farm tractors from Warsaw: 932/934 to 1934, 59 to 140 kW from four- and six-cylinder Ursus and ZTS Martin engines
The Ursus 30 series from Warsaw bundles the Polish maker's big four- to six-cylinder farm tractors. The type designations 932/934, 1134, 1234, 1734 and 1934 span the medium to big power class; the engines come from Ursus itself and from the Slovak engine maker ZTS Martin.
Read on 3 more paragraphs
The register lists here 5 versions with 58.8 to 139.7 kW or 80 to 190 hp from four- to six-cylinders of 4,562 to 7,299 cc, unladen weights from 4,240 to 6,555 kg, lengths from 4,130 to 4,580 mm, widths from 1,966 to 2,365 mm and heights from 2,920 to 3,550 mm, torque from 254 to 722 Nm at a rated speed of 2,200 rpm.
The 30 series formed, in Poland and the export markets of the Eastern Bloc, the upper power class of the Ursus programme for large farms and heavy draft work, above the more widespread smaller ranges of the brand. The shared use of Ursus and ZTS Martin engines reflects the close cooperation between tractor makers within the Eastern Bloc in building large farm machinery for collectivised agriculture across the region.
On the big Ursus tractors, what counts is the condition and compression of the four- or six-cylinder diesel, the condition of clutch and gearbox, the tightness of the hydraulics and lift, and rust on the cab and mudguards; parts are partly still available through Polish and Eastern European dealers.
Sources: SpecCodex register, model data: Ursus 30er-Serie, Ursus (manufacturer)
Technical data
Engine
| Engine make | Ursuscorrect |
|---|---|
| Engine | Z 8701.12, 86 kW (117 KM)correct |
| Fuel | dieselcorrect |
| Power | 116 hp (85.3 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 376 Nmcorrect |
| Cylinders | 6correct |
| Displacement | 6,842 cm³correct |
| Bore | 110 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 17correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,490 mmcorrect |
|---|---|
| Width | 2,280 mmcorrect |
| Height | 2,980 mmcorrect |
| Wheelbase | 2,710 mmcorrect |
| Ground clearance | 385 mmcorrect |
| Unladen weight | 6,555 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 16 V/8 Rcorrect |
| Forward gears | 16correct |
| Reverse gears | 8correct |
| Front tyres | 14.9-24 AScorrect |
| Rear tyres | 18.4-38 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 120 lcorrect |
|---|
Origin and approval
| Plant | Polandcorrect |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 13 kW/t (85 kW / 6.6 t)
Power class: Large (100–180 hp)
Stronger than 73% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Ursus 1234 have?
The Ursus 1234 delivers 116 hp.
How much does the Ursus 1234 weigh?
The unladen weight is 6,555 kg.
What engine does the Ursus 1234 have?
6 cylinders, 6,842 cm³ displacement, Diesel.
How fast does the Ursus 1234 go?
Top speed is 30 km/h.
What are the dimensions of the Ursus 1234?
4,490 mm × 2,280 mm × 2,980 mm.
When was the Ursus 1234 built?
Production years: 1990–2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 33 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.