Technical register for agricultural, construction and commercial machinery · sourced data
Start › Aerial work platforms › UpRight › AB48 HSRT

UpRight AB48 HSRT

Series: UpRight Boom Lift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AB48 HSRT from UpRight is part of the UpRight Boom Lift series. The engine delivers 23.9 kW. The machine is 6,100 mm long and 1,900 mm wide. The unladen weight is 3,500 kg. Top speed is 22 km/h. The fuel is diesel. The UpRight Boom Lift series covers 13 models. Rated output within it ranges from 22 to 60.4 kW; the AB48 HSRT sits at the bottom of that range with 23.9 kW. Its immediate neighbours are the AB50JRT below it with 22 kW and the SB47JRT above it with 35.8 kW. Unladen weight within it ranges from 3,500 to 19,119 kg; here the AB48 HSRT sits at the bottom of that range with 3,500 kg. 39 UpRight models across 6 series are on record.

UpRight Boom Lift: articulating and telescopic boom lifts from AB38W to SB85J with Deutz and Kubota engines, 22 to 60.4 kW, 2,570 to 19,119 kg weight

UpRight was a US manufacturer of mobile access platforms whose range is now continued under the Snorkel brand. This page gathers the self-propelled articulating and telescopic boom lifts: AB denotes the articulating boom, SB the straight telescopic boom, and MB the mast boom, while the suffixes 2WD, 4WD and RT mark drive and terrain capability. The lifts are powered by air-cooled Deutz engines of the F3L-2011 and F4L-2011 range and by Kubota diesels of the V1505 and V1505T type.

Read on 3 more paragraphs

The register lists here 13 versions with 22 to 60.4 kW, weights from 2,570 to 19,119 kg, lengths from 1,075 to 8,900 mm and widths from 810 to 2,603 mm.

Boom lifts of this kind are used in construction, industrial maintenance and facade work for working heights scissor lifts cannot reach; UpRight ranked alongside Genie and JLG as an established brand of the segment before Snorkel took over the range.

For a used purchase, check the tightness of the boom and platform hydraulic cylinders, the condition of the wiring through the articulation joint, the function of the emergency lowering system, tyre condition, and the operating hours on the Deutz or Kubota engine; parts now run through Snorkel. On the older models no longer carried by Snorkel, it is also worth checking the availability of control boards, which can become a bottleneck on some model years.

Sources: Kennwerte der Modelle UpRight Boom Lift

Technical data

Engine

Fueldieselcorrect
Power23.9 kWcorrect

Dimensions and weights

Length6,100 mmcorrect
Width1,900 mmcorrect
Unladen weight3,500 kgcorrect
Platform length1,200.1 mmcorrect
Platform width800.1 mmcorrect

Drivetrain and chassis

Top speed22 km/hcorrect

Working data

Platform capacity215 kgcorrect

Where this model stands

Power-to-weight ratio: 6.8 kW/t (24 kW / 3.5 t)

Stronger than 31% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the UpRight AB48 HSRT have?

The UpRight AB48 HSRT delivers 23.9 kW.

How much does the UpRight AB48 HSRT weigh?

The unladen weight is 3,500 kg.

How fast does the UpRight AB48 HSRT go?

Top speed is 22 km/h.

What are the dimensions of the UpRight AB48 HSRT?

6,100 mm × 1,900 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare