Univan 58-42L
Built: 2003 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Univan – other models: the collective page of the 58-42, 58-421 chassis variants and their derivatives, four-cylinder throughout at 2,800 cm³, gross weight 5,800 kg
This page gathers Univan trucks the register could not assign to a named range: the chassis variants 58-42, 58-42L and 58-421, also listed under the prefixed brand name Univan. The model designations follow an in-house numeric logic of series and variant codes, typical of smaller truck makers for registration purposes. Such collective naming, combining a numeric chassis code with the brand prefix, is common among smaller regional manufacturers whose vehicles are recorded through national type-approval registers rather than marketed under a single international model line.
Read on 3 more paragraphs
The register lists here 8 versions, four-cylinder throughout, at 2,800 cm³, unladen weights from 3,160 to 4,570 kg, a gross weight of 5,800 kg, lengths from 7,400 to 9,350 mm and widths from 2,250 to 2,300 mm.
With a uniform engine capacity and uniform gross weight but varying unladen weights and lengths, the range shows a typical chassis family of a smaller commercial-vehicle maker, in which one base engine drives several body and wheelbase variants. Vehicles in this weight class take on distribution and municipal routes for which large trucks are uneconomical and small vans underpowered; a single chassis with several body variants keeps servicing and parts stock simple for the operator.
Buying used, these chassis need checking for rust on the frame and load bed, the condition of the braking system and axle mounts, and the availability of engine and body parts, which for a small, regionally rooted brand is often limited and requires targeted research from a vehicle historian. Also worth checking is the condition of the load-bed floor and fittings such as side boards and lashing points, which wear most under commercial use.
Sources: SpecCodex register, model data: Univan (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Length | 7,400 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Wheelbase | 4,980 mmcorrect |
| Unladen weight | 4,570 kgcorrect |
| Gross vehicle weight | 5,800 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Univan 58-42L weigh?
The unladen weight is 4,570 kg.
What is the gross vehicle weight of the Univan 58-42L?
5,800 kg.
What engine does the Univan 58-42L have?
4 cylinders.
What are the dimensions of the Univan 58-42L?
7,400 mm × 2,300 mm.
When was the Univan 58-42L built?
Production years: 2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.