Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Umesläp › Other models › Ume Light-3 2019

Umesläp Ume Light-3 2019

Built: 2019 · Series: Other models

More machines from model year 2019

The photo shows the Ume Light-1 07 2023 from the same series. Source: kolesa.ru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Umesläp Ume Light-3 2019 is a vehicle built by Umesläp. Production: 2019. The engine delivers 125 kW, has 4 cylinders, with a displacement of 2,299 cm³. The vehicle is 6,220 mm long and 2,115 mm wide. The unladen weight is 2,433 kg. The gross vehicle weight is 3,500 kg. The gearbox offers 6 gears. Unladen weight across the Umesläp range ranges from 522.5 to 2,463 kg; the Ume Light-3 2019 sits at the top of that range with 2,433 kg. Its immediate neighbours are the UMESLÄP B50-8_2026 below it with 940 kg and the Ume Light-1 07 2023 above it with 2,463 kg. Gross vehicle weight across the Umesläp range ranges from 1,230 to 3,500 kg; here the Ume Light-3 2019 sits at the top of that range with 3,500 kg. 137 Umesläp models across 2 series are on record.

Umesläp – other models: the collective page with the Ume Light-1 07 2023 and the Ume Light-3 2019, four-cylinder engines from 120 to 125 kW, kerb weights 2,433 to 2,463 kg, gross weight 3,500 kg

This page gathers the Umesläp models the register could not assign to a named series: the Ume Light-1 07 2023 and the Ume Light-3 2019. The Ume Light names combine a series designation with a registration or build year and point to a light-duty series aimed at the 3.5-tonne class.

Read on 4 more paragraphs

The register lists 2 versions here with four-cylinder engines from 120 to 125 kW out of 2,299 cm³ displacement, kerb weights from 2,433 to 2,463 kg, a gross vehicle weight of 3,500 kg, lengths of 6,220 to 6,234 mm and a width of 2,115 mm.

With engine output above 120 kW at only 3.5 tonnes gross vehicle weight, this is a comparatively powerful chassis for its class, of a kind built for vehicles with high power demand, for instance towing a trailer or operating on demanding terrain.

When buying used, check the condition of the turbocharger and exhaust after-treatment on a high-output diesel engine, corrosion on the frame and body, the function of brakes and suspension under frequent full loads, and the service history; parts are usually available through independent commercial-vehicle workshops in Scandinavia.

A four-cylinder diesel of this power density reaches it on current build years only under the Euro 6 emission standard, which mandates selective catalytic reduction with AdBlue injection; without that system, an engine this powerful could not meet the standard's nitrogen-oxide limits.

Sources: SpecCodex register, model data: Umesläp

Technical data

Engine

Power125 kWcorrect
Cylinders4correct
Displacement2,299 cm³correct

Dimensions and weights

Length6,220 mmcorrect
Width2,115 mmcorrect
Unladen weight2,433 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 51.4 kW/t (125 kW / 2.4 t)

Stronger than 87% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Umesläp Ume Light-3 2019 have?

The Umesläp Ume Light-3 2019 delivers 125 kW.

How much does the Umesläp Ume Light-3 2019 weigh?

The unladen weight is 2,433 kg.

What is the gross vehicle weight of the Umesläp Ume Light-3 2019?

3,500 kg.

What engine does the Umesläp Ume Light-3 2019 have?

4 cylinders, 2,299 cm³ displacement.

What are the dimensions of the Umesläp Ume Light-3 2019?

6,220 mm × 2,115 mm.

When was the Umesläp Ume Light-3 2019 built?

Production years: 2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare