Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Turkfiat › Other models › 54C Special

Turkfiat 54C Special

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Turkfiat 54C Special is a machine built by Turkfiat. The engine delivers 54 hp (40 kW). The engine is water-cooled. The model was built in Ankara, Turkey. It was succeeded by the New Holland 54C Special. Rated output across the Turkfiat range ranges from 45 to 80 hp; the 54C Special sits in the lower part of that range with 54 hp. Its immediate neighbours are the 480 below it with 48 hp and the 55-46 above it with 55 hp. Rated output across the Turkfiat range ranges from 34 to 68 kW; here the 54C Special sits in the lower part of that range with 40 kW. 9 Turkfiat models are on record.

Türk Fiat – other models: tractors outside the named ranges, from types 415 and 480 to 54C, 55-46, 65-46, 70-46 and 80-66 S DT, 34 to 68 kW, 45 to 80 hp, Fiat licence from Ankara

This page gathers Türk Fiat tractors outside the named ranges, from the early types 415 and 480 to the 54C, 55-46, 65-46, 70-46 and 80-66 S DT ranges. Türk Fiat was founded as TürkTraktör in Ankara and built Fiat-licensed tractors for the Turkish market; on the types 55-46, 65-46 and 70-46 the leading number gives the power recorded in the register in hp.

Read on 3 more paragraphs

The register lists 9 versions with 34 to 68 kW (45 to 80 hp); the types 54C and 54C Special as well as the DT version 80-66 S DT stand for special versions with revised equipment within the same power class.

In this power class the Türk Fiat types covered the standard needs of Turkish farms and were technically related to the European Fiat ranges of the same era, with which they shared engine and drivetrain technology. TürkTraktör remains among Turkey's largest tractor makers and now continues production under the New Holland brand.

When buying used, as with the European Fiat siblings, check clutch, gearbox, hydraulic tightness, and the cylinder head and injection pump of the diesel engine; parts are available through the Turkish TürkTraktör trade and independent Fiat farm machinery dealers, with wear and engine parts often interchangeable with European Fiat models owing to their close technical kinship.

Sources: SpecCodex register, model data: Türk Fiat (weitere Modelle)

Technical data

Engine

Power54 hp (40 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantAnkara, Turkeycorrect

Other data

SuccessorNew Holland 54C Specialcorrect

Frequently asked questions

How much power does the Turkfiat 54C Special have?

The Turkfiat 54C Special delivers 54 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare