StartTrailersMoeslein › TTD 11

Moeslein TTD 11

Built: 2026 · Series: TTD

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Between 2026, Moeslein built the Moeslein TTD 11 as a trailer from the TTD series.

Technical data

Other data

Achsen-Konfiguration2 Achsencorrect
AusstattungABS, Druckluftbremsecorrect
FarbeBeigecorrect
FederungBlattcorrect
Gesamtgewicht11,900 kgcorrect
Hinterreifengröße245 / 70 R 17,5correct
Kippwinkelnach hinten 50 Grad Kippwinkel und Seitlich 45 Grad Kippwinkelcorrect
Laderaumbreite2,430 mmcorrect
Laderaumlänge5,110 mmcorrect
Leergewicht2,980 kgcorrect
Maximales Ladegewicht8,920 kgcorrect
Reifengröße245 / 70 R 17,5correct
Vorderreifengröße245 / 70 R 17,5correct

Frequently asked questions

When was the Moeslein TTD 11 built?

Production years: 2026.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 5 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3] [4] [5]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare