Tracon Uden TA1010
Built: 1996 · Series: Other models
More machines from model year 1996
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tracon Uden – other models: trailers and semi-trailers from Uden in the Netherlands outside the named ranges, from tipping trailers to low-loaders, 1.75 to 62 t gross weight, 1.6 to 14 m length
This page gathers the Tracon trailers and semi-trailers the register could not assign to a named range. The manufacturer is based in Uden in the Netherlands; the model list runs from short tipping and tandem-axle trailers with type codes such as TA, TM and TO, through the T0 series, to long low-loader and special bodies, pointing to a very wide production programme spanning the light and heavy segments.
Read on 3 more paragraphs
The register lists 69 versions here with gross vehicle weights from 1,750 to 62,000 kg. Lengths run from 1,638 to 14,040 mm, widths from 1,730 to 2,600 mm.
With this range Tracon serves both the market for small agricultural and commercial tipping trailers and the heavy-haulage segment for construction machinery and bulky cargo, where Dutch and Belgian builders have traditionally held a strong position.
When buying used, the checkpoints differ by size: on small tippers the side panels, hydraulic rams and floor plates; on the heavy semi-trailers the frame, axle assemblies, brake system and overrun coupling, plus corrosion on cross members and the kingpin plate. Parts for the smaller ranges are widely stocked by agricultural machinery dealers, while supply for the heavy versions runs more through the manufacturer; on older low-loaders the condition and operation of the ramps and wedges is worth an extra check.
Sources: SpecCodex register, model data: Tracon Uden (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,560 mmcorrect |
|---|---|
| Wheelbase | 574 mmcorrect |
| Unladen weight | 5,220 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Tracon Uden TA1010 weigh?
The unladen weight is 5,220 kg.
What is the gross vehicle weight of the Tracon Uden TA1010?
20,000 kg.
Up to what speed is the Tracon Uden TA1010 approved?
Approved up to 100 km/h.
When was the Tracon Uden TA1010 built?
Production years: 1996.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AN 1020
O
OPL 55 TL
OPLZ50TL
OPLZ55EL
T0 1 52 8
T0 2 1210
T0.1,5-4
T0.1727
T0.S1210
TA.0707
TA.10.20
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
