Toyota VERSO VAN
Built: 2012-2018 · Series: VERSO
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Toyota Verso – the van version of the compact MPV registered as a commercial vehicle, 2.0 and 2.2-litre D-4D diesels with and without D-CAT, 1,998 to 2,231 cc, 93 kW, 1,425 to 1,615 kg unladen weight
This page gathers the van versions of the Toyota Verso registered as a commercial vehicle. The Verso arrived in 2009 as the successor to the Corolla Verso and is a compact MPV with five to seven seats; for commercial users Toyota offered in several countries a two-seat van variant with the second and third seat rows removed and the load area panelled in, classified for tax purposes as a commercial vehicle. D-4D denotes Toyota's diesel direct injection, D-CAT the additional exhaust aftertreatment of the 2.2-litre variant, and F in some market versions marks the base equipment level.
Read on 3 more paragraphs
The register lists here 7 versions with about 93 kW from four-cylinder diesels of 1,998 to 2,231 cc, unladen weights from 1,425 to 1,615 kg, gross weights from 2,160 to 2,260 kg, lengths from 4,440 to 4,460 mm and widths from 1,770 to 1,790 mm.
The Verso van version was aimed at tradespeople and small businesses seeking an agile, car-based vehicle with an enclosed load area without switching to a conventional van, putting it in competition with similarly converted compact MPVs from other makers.
On used examples, the condition of the D-4D diesel engines counts – injectors, turbocharger, and on D-CAT versions also the catalyst – along with the timing chain or belt depending on the engine variant, and the load-area trim for damage; parts run through the Toyota network and are well available thanks to the passenger-car base.
Sources: SpecCodex register, model data: Toyota Verso, Toyota Motor Corporation (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,998 cm³correct |
Dimensions and weights
| Length | 4,460 mmcorrect |
|---|---|
| Width | 1,790 mmcorrect |
| Wheelbase | 2,780 mmcorrect |
| Unladen weight | 1,425 kgcorrect |
| Gross vehicle weight | 2,260 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Toyota VERSO VAN weigh?
The unladen weight is 1,425 kg.
What is the gross vehicle weight of the Toyota VERSO VAN?
2,260 kg.
What engine does the Toyota VERSO VAN have?
4 cylinders, 1,998 cm³ displacement.
What are the dimensions of the Toyota VERSO VAN?
4,460 mm × 1,790 mm.
When was the Toyota VERSO VAN built?
Production years: 2012-2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
VERSO
VERSO 2.0 D-4D-F VAN
VERSO 2.2 D-4D D-CAT VAN
VERSO 2.2 D-4D VAN
VERSO 2.2 D-4D-F VAN
VERSO 2.2 D-CAT AUTOMAAT VAN
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.