Toyota CHALLENGER 3.4V6 3DC. SHD
Built: 1997 · Series: CHALLENGER
More machines from model year 1997
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Toyota Challenger – the European and export name for the off-road 4Runner/Hilux Surf, three- and five-door, with turbodiesel, automatic and COMM commercial version, 3.0- and 3.4-litre engines
The Challenger is the name used in Europe and other export markets for the off-road Toyota 4Runner, sold in Japan as the Hilux Surf and built on the Hilux pickup chassis. The abbreviations in the type designations are registration standard: 3D and 5D give the number of doors, TD stands for turbodiesel, AUT for automatic transmission and COMM for the version registered as a commercial vehicle without a rear seat, used by trade and delivery businesses reclaiming VAT.
Read on 3 more paragraphs
The register lists here 11 versions with four- to six-cylinders of 2,982 to 3,378 cm³, unladen weights from 1,736 to 2,090 kg, gross weights from 2,510 to 2,680 kg and widths from 1,800 to 1,820 mm.
The Challenger positioned itself between the more compact RAV4 and the heavy Land Cruiser models and competed with the Mitsubishi Pajero, Nissan Terrano and Isuzu Trooper; the COMM version additionally made it attractive to business owners seeking an off-road commercial vehicle with VAT recovery.
On used examples, the condition of the turbocharger and injection pump counts on the turbodiesels, the transfer case and freewheel hubs of the four-wheel drive on all models, rust on the frame and wheel arches, and on the COMM version the condition of the bare load-area trim; parts run through the Toyota network.
Sources: SpecCodex register, model data: Toyota Challenger, Toyota Europe (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 3,378 cm³correct |
Dimensions and weights
| Width | 1,820 mmcorrect |
|---|---|
| Wheelbase | 2,360 mmcorrect |
| Unladen weight | 1,784 kgcorrect |
| Gross vehicle weight | 2,510 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Toyota CHALLENGER 3.4V6 3DC. SHD weigh?
The unladen weight is 1,784 kg.
What is the gross vehicle weight of the Toyota CHALLENGER 3.4V6 3DC. SHD?
2,510 kg.
What engine does the Toyota CHALLENGER 3.4V6 3DC. SHD have?
6 cylinders, 3,378 cm³ displacement.
When was the Toyota CHALLENGER 3.4V6 3DC. SHD built?
Production years: 1997.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
CHALLENGER 3.0 TD 3D
CHALLENGER 3.0 TD 3D AUT.
CHALLENGER 3.0 TD 3D AUTC
CHALLENGER 3.0 TD 3D COMM
CHALLENGER 3.0 TD 5D COMM
CHALLENGER 3.0TD 3D AUT C
CHALLENGER 3.0TD 5D C AUT
CHALLENGER 3.0TD 5D COMM
CHALLENGER 3.0TD 5DSHD C.
CHALLENGER 3.0TD5DSHDCAUT
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
