Toolcarrier Lanz Alldog
Built: 1953-1954 · Series: Other models
More machines from model year 1953
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 1953-1954, the Toolcarrier Lanz Alldog is a tractor from Toolcarrier. It is powered by a single-cylinder engine producing 8.8 kW.
It runs on diesel; the engine is water-cooled. As standard, it runs on 5.50-16 tyres at the front and 7-24 at the rear. 2,115 units were produced in all.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 12 hp (8.8 kW)correct |
| Cylinders | 1correct |
| Displacement | 533 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,750 mmcorrect |
|---|---|
| Width | 1620-2180 mmcorrect |
| Height | 1,700 mmcorrect |
| Wheelbase | 2234-2306 mmcorrect |
| Unladen weight | 960 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Forward gears | 5correct |
| Reverse gears | 1correct |
| Front tyres | 5.50-16correct |
| Rear tyres | 7-24correct |
Origin and approval
| Plant | Germanycorrect |
|---|---|
| Units built | 2,115correct |
Frequently asked questions
How much power does the Toolcarrier Lanz Alldog have?
The Toolcarrier Lanz Alldog delivers 12 hp.
What engine does the Toolcarrier Lanz Alldog have?
1 cylinders, Diesel.
When was the Toolcarrier Lanz Alldog built?
Production years: 1953-1954.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
