Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Grapples › TOKU › GT › GT-120

TOKU GT-120 – specifications

Series: GT

Build year not documented · Data origin: Manufacturer information · sources

Source: toku-net.co.jp

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TOKU GT-120 belongs to the Grapples category. It is a grapple used for grabbing, sorting and handling material. The equipment type is Mechanical grapple. It fits carrier machines from 12 to 14 tonnes operating weight. The unladen weight is 610 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The GT series covers 9 models. Unladen weight within it ranges from 60 to 2,470 kg; the GT-120 sits in the lower part of that range with 610 kg. Its immediate neighbours are the GT-60 below it with 380 kg and the GT-200 above it with 1,150 kg. 107 TOKU models across 19 series are on record.

Technical data

Dimensions and weights

Unladen weight610 kgcorrect

Other data

Carrier max.14 tcorrect
Carrier min.12 tcorrect

Frequently asked questions

How much does the TOKU GT-120 weigh?

The unladen weight is 610 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.‌​⁠‍‌‍​​‌‍​‍‌‍​‍‍‌‍⁠

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Manufacturer documentation, toku-net.co.jp (retrieved August 2026) · Dealer data sheet, toku-net.co.jp (retrieved August 2026) · Data sources and cross-checks

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare