StartTractorsToko › GF18

Toko GF18

Series: Other models

The photo shows the 820H from the same series. Source: https://cn.baupool.com/details/%E5%BE%AE%E5%9E%8B%E6%8C%96%E

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Toko GF18 is a tractor made by Toko. Engine output is 13 kW.

It runs on Gas; the engine is air-cooled. Within the range, rated power spans from 13 to 39 kW; with 13 kW, the GF18 sits at the bottom end. The next one up is the 820H with 15 kW.

Technical data

Engine

Engine makeYanmarcorrect
FuelGascorrect
Power18 hp (13 kW)correct
Coolingair-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantJapancorrect

Frequently asked questions

How much power does the Toko GF18 have?

The Toko GF18 delivers 18 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare