Thaler TTA 2091
Built: 2020-2025 · Series: TTA
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Thaler TTA – low-loader trailers from Austria: 7 versions, unladen weight 980 to 9,400 kg, gross weight 3,500 to 24,000 kg, length 4,120 to 10,380 mm
Thaler is an Austrian trailer manufacturer. The TTA range gathers the company's low-loader trailers in the register, spanning from a small single-axle trailer to a heavy machinery transporter; the type designations TTA 2091, TTA 5087 and TTA 8008 K distinguish different builds within the range.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 980 to 9,400 kg, gross weights from 3,500 to 24,000 kg, lengths from 4,120 to 10,380 mm and widths from 2,500 to 2,550 mm.
The wide span of unladen weight, gross weight and length shows that the TTA range runs from a compact low-loader for smaller construction machinery to a heavy multi-axle low-loader for excavators, wheel loaders or agricultural machinery. Trailers of this kind are common in construction, machinery rental and agricultural technology, wherever equipment of varying size needs to be transported, often behind different combinations on the same day.
When buying used, check the condition of the chassis and load floor, the operation of the overrun brake or, on the heavier models, the service braking system, the condition of the axles and tyres, and the locking and condition of the ramps. On the long, heavy versions it is also worth checking the chassis for sag and corrosion in the side rails, as well as the condition of the drawbar coupling and lighting system.
Sources: SpecCodex register, model data: Thaler TTA
Technical data
Dimensions and weights
| Length | 4,120 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 3,250 mmcorrect |
| Unladen weight | 1,100 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Thaler TTA 2091 weigh?
The unladen weight is 1,100 kg.
What is the gross vehicle weight of the Thaler TTA 2091?
3,500 kg.
Up to what speed is the Thaler TTA 2091 approved?
Approved up to 100 km/h.
What are the dimensions of the Thaler TTA 2091?
4,120 mm × 2,550 mm.
When was the Thaler TTA 2091 built?
Production years: 2020-2025.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
