Teto Homes 44 - NEW ORLEANS
Built: 1992 · Series: Other models
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Teto Homes 44 - New Orleans: EU class O4 residential trailer with a 10,500 kg gross weight, 13,870 mm length, 8,980 kg unladen weight and a 9,330 mm wheelbase
The 44 - New Orleans belongs to the group of residential and leisure trailers meant for permanent or long-term use as living accommodation rather than frequent road use. Unlike a touring caravan, a unit like this is usually intended for stationary siting on a pitch and is moved only rarely. With a gross weight of 10,500 kg it sits just inside EU trailer class O4, the group of heavy trailers above 10 tonnes.
Read on 3 more paragraphs
Empty, the trailer weighs 8,980 kg, leaving 1,520 kg for fittings, cargo and occupants at a gross weight of 10,500 kg. At 13,870 mm long and 2,550 mm wide, it is a very long but narrow unit, typical of a residential layout with several rooms. Its 9,330 mm wheelbase spreads the axles over most of the vehicle's length, giving it stability during occasional moves.
Residential trailers of this size are usually delivered to their pitch once and then used there permanently or seasonally, which is why interior fit-out, insulation and connections for water, electricity and waste matter more to their value than pure road performance. As an O4-class vehicle it needs a dual-line compressed-air braking system, mandatory from class O3 upward.
When buying a residential trailer this old, dating from 1992, checking for damp matters most: the roof, window frames and floor panel should be checked for water damage and soft spots, since such damage often progresses unnoticed over decades. The chassis, axles and braking system should also be checked for corrosion if the trailer is still meant to be moved.
Sources: SpecCodex-Register: Kennwerte des Modells Teto Homes 44 - New Orleans
Technical data
Dimensions and weights
| Length | 13,870 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,330 mmcorrect |
| Unladen weight | 8,980 kgcorrect |
| Gross vehicle weight | 10,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Teto Homes 44 - NEW ORLEANS weigh?
The unladen weight is 8,980 kg.
What is the gross vehicle weight of the Teto Homes 44 - NEW ORLEANS?
10,500 kg.
Up to what speed is the Teto Homes 44 - NEW ORLEANS approved?
Approved up to 100 km/h.
What are the dimensions of the Teto Homes 44 - NEW ORLEANS?
13,870 mm × 2,550 mm.
When was the Teto Homes 44 - NEW ORLEANS built?
Production years: 1992.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
